Close

23161 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メc선릉레깅스룸literary"

  • Frequencies

  • For some reason the 47 pF value for the caps is sitting in my mind. Either after 'calibration' the LC meter is so far off that it read both my TI-89's and my V200's caps 51 pf, both ~8% high, or both of them are within their 10% tolerance and reading...
  • Gathering information

  • Tonight I gathered some reference/research material for this project. Fortunately, several others have done some really great work with this module, so here's credit to them: LTC3780 DatasheetBeyond Logic blog postTemplaro blog postGreat Scott videoJulien...
  • Parity with Fibonacci

  • One thing that sets PEAC apart from the Fibonacci and Pisano series is the parity, or mod 2 remainder. When you take the natural sequence 0, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144, 233, 377, 610, 987, 1597... The mod 2 is 0, 1, 1, 0, 1, 1, 0, 1, 1,...
  • Finally, some publicity!

  • An article recently published on MOONGIFT, a Japanese developer site, has showcased RasDash! The article is entirely in Japanese and Google Translate won't accept the URL as it has special characters but YANDEX does. Below are some links and a basic...
  • It's like being in college again.

  • Mid-day update: April 20, 89 PDWhile over 75% of the internal parts are finished printing, but there is still too much to do. We have started wiring up the reactor with LEDs but it is slow going (25% done). We have not even started on the code to drive...
  • MORE RADII!!

  • I haven't putzed about with the v0.1 base at all, but I think I've got a motor mount design that I like. It's got the split bolt setup for securing the motor (including a cutout for holding a 2-56 nut), and the legs are cool lofted dealies. Lots of radii...
  • Fibonacci

  • With the ALU verified and the RAM connected, today the breadboard determined that the first 8-bit Fibonacci number is 144. 0000 0000 ld $00 ; outer loop 0001 c200 st [$00] ; a=0 0002 0001 ld $01 ; b=1 0003 fc0a bra $0a 0004 0200 nop ; (pipelining) 0005...
  • MIKBUG Commands

  • MIKBUG (Smithbug) has the following case-sensitive commands. ; V VIEW MEMORY; E CHANGE MEMORY; M MOVE MEMORY; I FILL MEMORY; F FIND  ; D DISASSEMBLE CODE; & S1 LOAD PROGRAMME; G GO TO PROGRAM; J JUMP TO TARGET PROGRAM ; T TRACE PROGRAM; K CONTINUE...
  • All Your ISA Belong to Me!

  • Before I began the layout of the DDL4-CPU, I came up with an initial Instruction Set Architecture (ISA) for the design. It went through several revisions as I was designing the boards and refined the components. Here at the last minute as I am...
  • Keyboard Driver Almost Done

  • I ended up using the key combination for On and Mode (it seemed appropriate) to change the mode, which basically is between TI-83 keyboard mode for the TI-83 emulator and Regular mode which allows through various submodes access to just about all of...
  • BME680 is weird

  • So, working with the BME680 has left several odd impressions.1) The gas sensorNo idea what it is measuring, but it does measure something.  For example, a Sharpie, immediately picked up.  It reads in Ohms.  Range seems to be around 10k...
  • Initial LED Selection

  • When I set about this project the first thing I wanted to work out was what LED I was going to use, as this would drive the requirements of everything else in the project, driver, lens, heatsinking, etc. Due to personal preference I decided that I wanted...
  • Headband PCB - Version 0.89

  • I sent out the Headband Sensor Package Version 0.89 PCB's to OSH Park, Got three purple PCB's back, and they look great! The top and bottom of the boards look pretty good. I could have flipped the resistor silkscreen (the R1, R2 and R3),...