Close

90479 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • The New Model
  • Log     from Open Indirect Ophthalmoscope
  • The design models have been 3D printed and assembled. We made two devices, only the outer casings are different in the two models. One is printed on a SLS 3d printer (Nylon PA-12) and another one with an FDM 3D printer (PLA Black).Both the models are...

  • Removing undesired reflections/spots
  • Log     from Open Indirect Ophthalmoscope
  • Hey all!This is another project log to update the latest developments of OWL (Just in case you forgot, we call it OWL because, well, Open Indirect Ophthalmoscope, OIO).So, since the last time I made a log, we’ve been working on--making an elegant GUI...

  • Design Considerations
  • Log     from Open Indirect Ophthalmoscope
  • Earlier version of the device was reconsidered in terms of following aspects:• Accommodating for different refractive errors • Aesthetics • Ergonomics • Weight distribution OIO ASSEMBLY EXPLODED ASSEMBLY1. ACCOMMODATING FOR DIFFERENT REFRACTIVE ERRORS...

  • Donor Cabinet work
  • Log     from Star Trek: The Mirror Universe Pinball
  • 7/29/2013: As I stated; been working on the cabinet for the Mirror universe project. I bought a couple of "project" Bally Star Treks from a fellow pinball collector out of Shertz a few years ago. These have been setting in storage for a while... and...

  • CAD Progress
  • Log     from Open LIDAR
  • I've been making progress on the CAD modelling for the project. I've got a draft model of all of the hardware at this point. This weekend I'll start printing/testing components. I decided to go with a double herringbone gear for connecting the yaw...

  • 8/30/2020 initial test powering boat
  • Log     from solar powered boat
  • Today I managed to test the motor after tightening the belts considerably so they wouldn't skip teeth.  I had to hammer the pulley on the shaft to get the higher tension, so an adjustable idler pulley on each belt may may more sense in the future....

  • TEETH
  • Log     from TD404
  • So this log is unique to my project. Using a diamond bit, I drilled holes in some of my old wisdom teeth. Using hot glue, I am fixing them to the buttons for the warp and feedblast mods. (TD404-Tooth Decay404)

  • Early notes
  • Log     from CalendarClock
  • This is retroactive notes, based on memory of this project Here is an early test (april 2019) done with the gear changer. At that point I presumed a single axis could hold the gears, but there was too much play up/down so the later design holds the gears...

  • Ring gears.
  • Log     from Interdimensional Portal Gun
  • Modeled the ring gears.   Center and right have 23 teeth, left has 22 teeth.Image discs fit inside the ring against the lip, and another collar presses in to lock it in place.They will rotate in the housing on the round hub.

  • Board pliers MK 3
  • Log     from How lions etch PC boards
  • Then came board pliers MK 3, featuring bigger grip teeth, a handle ratchet, more aggressive slider ratchet, more curves to aid cleaning, a handle extension to clamp onto a stand, 5mm thick pieces. The ironing process yielded a marble like finish on...

  • Gear ratios
  • Log     from Crazy Clock
  • I'm going to label these two gears of interest the "inner" and "hour hand" gear. The hour hand gear is the one with the stem riser that winds up accepting the hour hand. The inner gear meshes on its outside edge with the minute hand shaft and on the...

  • Dynamic Interactivity Week 15
  • Log     from Dynamic Interactivity Final Project
  • i done the doll also i refind the doll cloth and make the doll neck more shorter i didn't do the full background the sensor cannot scan the people cause my background too dark . so i decided change the background just put the curtian for half.this is...

  • Designing for Calibration
  • Log     from 60W CO2 Laser Cutter Mk2
  • Designing parts to fit perfectly together is hard. Whether it's the coarseness of our fabrication tools or that of the vendor selling us these parts, nothing is perfect. Engineering has cute word for it: tolerances. Maybe it's me: "I can drill that hole...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday