90479 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Tinymovr R3.3 (alpha2) now available!
Log from Tinymovr Motor Controller
Good news, after an admittedly long wait, the new alpha2 boards (R3.3) are now available! These boards have a few layout improvements compared to the alpha1 boards, namely: Better signal routing allowing wider power traces on the rear side of the board....

Chains, sprockets, shafts and bearings
Log from Woody the Electric Four Passenger Bicycle
woody is using BMX cranks because they allow very small sprockets. Below is one of two assemblies before welding. The bottom bracket was turned on the lathe, and the two plates were made by sendcutsend. And here it is bolted in place. The holes...

Assemble everything together
Log from Veterobot
Finally we are ready to assemble everything together. Checkout the following link for step-by-step instructions: https://github.com/veter-team/veter/wiki/assemblingAnd if everything goes well, here what comes out:

Officially complete!
Log from Internet Connected Boot Dryer
The project is now officially completed!I got the new PCB's which solve the AC isolation problem and everything is working perfectly now!The ESP32 is no longer being affected by the fan, everything is working just as designed.I'm really excited,...

Rebirth
Log from IRIS : another open source spectrometer
Six years have passed since this project has been interrupted. I made some progress this afternoon. Everything works fine.

Plastic shock shields
Log from Smart Switch
The initial designs for the mechanical bits are now complete. Since this is AC power, we need plastic coverings for everything.

place and fixed parts
Log from Magic Info Mirror
Date: 20160109 All pieces are put in place and brackets are being screwed on to hold everything in place.

New power supply Thursday
Log from The Automagical Chicken Coop
I get my new power supply Thursday at which point I'll mount everything and post a new pic.

And they're off!
Log from Arduino Grow Chamber
All the parts are shipped now ... should have everything anywhere from Dec 8th and ... Jan 12th ... gonna be a long holiday =P

Context is everything
Log from Hackaday.bash.org
Courtesy of Ars:

initial build
Log from Silent Steam BOX
everything is mounted and initial power optimization is done the next step is fine tuning and some cable management

Update #1
Log from Low amperage PCB switch for robotics
I ordered the PCB, and parts from Mcmaster Carrshould have everything in about two weeks to test .

Production Boards
Log from Endbots DESC (Dual RC ESC)
I am ordering boards for what will be the production version. I will be selling these soon. Everything is coming together.

Completed
Log from Endbots DESC (Dual RC ESC)
The production boards are complete and they are available for sale now. Everything works great as it should.

Update #1
Log from Surface mount hot plate reflow controller
I ordered the last parts I need from Mcmaster Carr should have everything in a day or two.

|<
<
2
3
4
5
6
>
>|