I am not an electronic engineer so a lot of the process below is how, as an amateur, I go about implementing and testing my ideas. Basically a lot of trial and error and experimentation as I don't have the depth of knowledge or training to do otherwise...
Now trying to decide on an appropriate controller platform which would need to be low powered so naturally I thought a Arduino. However I will want to test it in the field remotely over a G4 connection so the setting can be tweaked. The unit would monitor...
As promised, I made a demonstration video, presenting Arduino Uno TWI terminal in live action. Short and to the point:This demo was recorded on Windows 7The app is also available on Linux.It features DS1338 battery-sustained NVRAM I/O.Download https://iobtoolkit.com/download/Sphinx...
Replaced Sub-Bass op-amps with one from the old PCB, still getting the same problemAccording to online, this is possibly due to the third stage circuit being unstable to to a small phase margin, causing sustained oscillationsWill get metrics on accuracy...
I achieved to communicate PICmaster and PC by USB. I had some problems with WIFI sometimes and training was turning off. Now I can use WIFI or USB(default) I'm going to make some corrections and try a long training without cuts :) Also I want this mode...
24th January 2019 - Thursday Story 1 ：Soldier training Signification 2013, I have be chosen to join the soldier training we call it PLKN (Program Latihan Khidmat Negara), It's very hard, suffer, interesting, happiness, full of memories...
Unfortunately I haven't had the time to post much, but having said that, the basic platform is almost ready. I've mounted the motor, installed the servos, and am busy adjusting everything for correct CG.Eventually (when they arrive) the flying wing will...
So, I went with slightly smaller fins and took a few inches off the nose to correct the over-stability issues. The winds were a bit high; 7mph or so sustained and gusting to roughly 15mph. This resulted in more weather-cocking (though not quite as bad...
So after having the new turbo installed for 2 weeks and covered 100 miles I decided to go on a last minute ski trip in the French alps. Rather than booking flights I thought I'd just take the car. This was a 2000Km round trip from london. Luckily the...
So I was trying to make a "regulator" and I noticed it seemed to start-up nicely as well.The trick is to use one of the feedback signals to generate a down pulse through a dumb charge pump. The P MOSFET conducts for a while (see the lower trace) and...
Control code works over USB at any given baud rate. Only baud rate of 9600 works over Bluetooth when connected to phone app or computer. There is probably a setting to change the baud rate of the module but that is not priority right...
We have added a tool to explore a tiny training set (100 files) and training a HMM.There is no code for classification at the moment, only for training.This is a draft, whose purpose is to be open and provide hints to where we are aiming, but in no ways...
Doing POS upgrades in multiple Target stores, Walmart keybox? (haven't been there yet), FedEx, and McDonalds DMB's. McD + Target on the same day = no sleep. Maybe this weekend.....I did however get a new nozzle, steel instead of brass. I need to...