103 Results for "대구오피강추↲www,optime4.com대구오피 대구마사지 ↲ 대구오피ᙗ 대구오피생각ᙗ 대구휴게텔 대구키스방 타임"

Program
Instructions from Mandala Maker
No external circuit is required for this Project.Download the project code here.Open the projects using Workshop 4. This project uses the Visi Environment.You can modify the properties of each widgets and buttons.

Mount uSD Card
Instructions from Mandala Maker
When the uSD card is not yet inserted, this message will appear on your gen4 Display: "Drive not mounted"After inserting your uSD card the GUI will be loaaded on your display.

Program
Instructions from Cash it Out
Download the project file hereExtract the contents of the files. Open the project file for the Arduino codes.Upload the Arduino code to your boardOpen the project using Workshop 4. This project uses the Visi Environment.You can modify the...

Program
Instructions from War Ships Game
Download the project code here.Open the projects using Workshop 4. This project uses the Visi Environment.You can modify the properties of each widgets and buttons. Do the following Steps for both displays.

Mount uSD Card
Instructions from War Ships Game
When the uSD card is not yet inserted, this message will appear on your gen4 Display: "Drive not mounted"After inserting your uSD card the GUI will be loaaded on your display.

Program
Instructions from Home Security
Note: Download the project code here. Workshop 4 – 4Duino Basic Graphics environment is used to program this project. (The same could be implemented in the latest Arduino IDE)This project requires the Arduino IDE to be installed as Workshop...

Home Automation - Garage Door Opener
Instructions from Home Automation - Garage Door Opener
gdoPi.local - PiCam & Apache SupportWe will be using a Raspberry Pi Camera Board (your choice, IR-filtered or NoIR version) to provide visual status updates of the garage door and leveraging the Apache HTTP daemon, at least for this beta release, as...

Program
Instructions from Survey Rover
Extract the contents of the files. Copy the nRF905 library file to the Arduino library location.Open the project file for Rover using Arduino IDE. This contains the code for the Arduino Uno in the rover car.You can check and modify the transceiver...

2 SOFTWARE
Instructions from 16 Channel 24vac detection over i2c
2.1 Raspbian with latest updates Install onto SD card using Win32DiskImager or as preferred Connect to Orbit Externet and run sudo apt-get update Change the timezone using sudo raspi-config and navigating to the appropriate...

Installing the REGISTRO Webpage
Instructions from STARTEC REGISTRO
We've finally come to the near end of our journey, and the first time we'll get to work with the actual program you'll be using. Tap yourself on the back my friend, you did a good job so far. Start by downloading the latest release here. Click on assets,...

Preparing & Installing Front-end to SD Card
Instructions from Instant WebStick - ESP8266 Web Server / NAS
For the SD card, you need a relatively old SD card to make this work, as the ESP8266 can only access the SD card in SPI mode, any card that without the SPI mode will not work. In my case, I am using an industrial 512MB micro SD card with FAT file system....

Phishing WiFi hotspots with captive portals
Instructions from Phishing WiFi hotspots with captive portals
Configure the website root folder in the php.ini file: nano /etc/php.iniFind the doc_root field and change it to /etc/www. An easy way to do this is by pressing ctrl+w then type doc_root and press enter.After you are done, save and exit.

Raspberry Pi Web Application for Beekeeping
Instructions from Raspberry Pi Web Application for Beekeeping
Go to the directory:cd Raspberry-Pi-Web-Application-Temperature-Reading cp monitor.py /usr/lib/cgi-bin/ cp webgui.py /usr/lib/cgi-bin/ Change the file ownership:sudo chmod +x /usr/lib/cgi-bin/monitor.py sudo chmod +x /usr/lib/cgi-bin/webgui.py sudo chown...

Ping3D - The Next-gen Table Tennis Blade
Instructions from Ping3D - The Next-gen Table Tennis Blade
Print the HandleI printed this piece with Wound Up! coffee filament, because, well, I had it around and it smells sooooo good when printing. It also feels very nice.Settings used:Material: PLA (Wound Up, 2.85mm)Nozzle: 0.8mm @ 215*CHeated Bed: 55*CBuild...

Creat the 'db_config.php' file
Instructions from Industry 4.0: An economical SAAS MES part 2
Use your text editor and modify it to include your specific database credentials. It's crucial to place your 'db_config.php' file outside of the public root directory of your web server. This practice significantly enhances the security of your application...

|<
<
1
2
3
4
5
>
>|