Close

128 Results for "！삼성추천유흥！Ⅳ【↖010± 4648 ±0930↗】┙！삼성셔츠룸！ⓔ！삼성룸싸롱！⑶！삼성란제리！′！삼성란제리셔츠룸！㎂！wrath"

  • Hello Anma
  • Hacker     in KOREA
  • 헬로출장 출장오피 출장마사지 출장안마 서울 경기도 전지역 예약비 선입금...

  • V1 PCB prototype
  • Log     from ARX Hand Project X1
  • 11 Jan 2019 Two versions of the circuit were created and tested: - Version 020 which used shift registers for controling the drivers along with a 4 bit R-2R DAC - Version 010 which used the PCA9685 with a digital potentiometer to control the drivers...

  • Dtto - Explorer Modular Robot
  • Instructions     from Dtto - Explorer Modular Robot
  • We need:- 1 x Part 006-1- 1 x Part 008-1- 1 x Part 010-1- 12 x Neodymium MagnetsAs we did in the previous step, we will put the magnets in the female parts. Now, remember to put all magnets with the north pole facing the outside of the module. If we...

  • Dtto - Explorer Modular Robot
  • Instructions     from Dtto - Explorer Modular Robot
  • We need:- 1 x Part 003-1- 1 x Part 006-1- 1 x Part 008-1- 1 x Part 010-1- 2 x Li-Po BatteriesJust as we did in step 6, we are going to assemble the part 003-1 to the other half of the module. We have to make sure that it rotates nice and easy.Now that...

  • Core Component Selection
  • Log     from Reflow Soldering Hotplate
  • MCU x CH552  STM32G031J6 (link): no USB, 8pin package STM32F042F4 (Link): USB2.0, 1x 12bit ADC Temperature Sensors PT100(ADC)P0K1.232.6W.Y.010€ 6.08/ 1€ 3,32/ 1kuPT100(ADC)PTFC101B1G0(datasheet)€ 2,81/ 1€ 1,34/ 1kuThermistor(ADC)NTCLE203E3104GB0A(datasheet)€...

  • SAMD21G Oled Sensor Board
  • Instructions     from SAMD21G Oled Sensor Board
  • order the board from OSH Park here: https://www.oshpark.com/shared_projects/SkULVRHA , the price for three 4 layer pcbs is $12.50follow the bom when ordering and hand stuffing components, solder on the oled display but do not tape it downburn in the...

  • Add Long Instruction
  • Log     from BREDSAC
  • A small addition to the memory addressing logic is needed to support long word instructions. A new control signal MSW indicates that the most significant short word of a long word is being addressed, and forces the LSB of the address to 1. We can now...

  • Finalised PCB
  • Log     from Earth Lander 84
  • All parts of the PCB is wired up and all connections are buzzed out to test for shorts and bad connections.Going from left to right on the PCB there are a screw terminal for 5 volts and a power-on LED and above that the reset button and its support circuity...

  • Transfer Instructions
  • Log     from BREDSAC
  • The two Transfer instructions, T and U, transfer the contents of the accumulator to the main memory. The difference between them is that T also clears the accumulator, whereas U does not. These are the first instructions we've implemented so far that...

  • First Github drop
  • Log     from Adding BLE to a "dumb" treadmill
  • Here be the source code!Next steps: after being happy with the small Xiao BLE for the initial prototype phase (will it work? Of course!), I decided to use the Adafruit nrf528xx feather because of:I already have a couple of LCD feathers. It will make...

  • Maths
  • Log     from Jelly
  •  Jelly have a change in signals for  fake ALU eeprom.  Now the low byte address is the argument and high byte address is the operation. Only unary math are allowed, and using address A08, A09, A10, the operations are:high byte (page)operationexample000clear...

  • memory
  • Log     from YUL
  • # http://www.ibiblio.org/apollo/hrst/archive/1689.pdf # pg. 4-5 memory = range(00, 010000) bank = range(00, 010) super_bank_bit = 0 # Memory adressing # http://www.ibiblio.org/apollo/NARA-SW/E-2052.pdf # Section 1.1.2 paragraph 2 #Flip-Flop Registers...

  • SAMD21G Oled Sensor Board
  • Details     from SAMD21G Oled Sensor Board
  • Compiling the code for the first sensor board with a test code sketch occupied 98% of the available flash. A similar sketch on the new Arm design uses only 10%. Awesome...Only one revision manufactured by OSH Park has been created so far. It has a few...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday