April 22, 2022 - Added the RPLidar, Amber B1 Arms, Insta 360 Pro II camera, Hecate speakers, Luna wireless display dongle, OakD-Lite 3d depth cameras, and the Mech router from Netgear called Orbi with 5G wireless capabilities. This was a very serious...
Done with installing the main components, the walls of the 3D print were too thick so I used a rotary tool to carve some space out for the custom PCB that holds the ESP32, Boot button and space for headers to connect the serial converter. next is to...
All the housing parts were modeled and 3d printed. The designs did not take do a good job of taking into account the wires and new holes will be needed for wires to go through
The body for the Ardumower is almost done. Fully 3D-printable in a 20x20x20 printer. Designed in Fusion360. The body was sliced in 17 parts. Next up is a finishing and painting. Total print time around 200h with 0.6mm nozzle and 0.28 layers. Here is...
So I bought a 3D pen to try and weld the 4 bezel parts together.This is the test run on some prototype prints. I'm amazed by how easy this was and how sturdy the result actually is.Final result (bezel only) will be ready in a week :D
Here you can see the improved controller in action. It's able to walk in 3D (in this case following a circular path) and reject large disturbances. Still to be added: torso balancing, transitions between walking/standing, and yaw control.
Printed the enclosure on on a CraftboxXL at UT Maker Space. Over 6 hours print time! Shout out to Electronic_Grenade at Thingiverse for the 3D CAD file https://www.thingiverse.com/thing:2376245.
Label the signal wire for each “L” (for left), “C” (for center), and “R” (for right). NOTE: You can use any photo-interrupter you want, but you may have to modify the mounting holes in the 3D housing.
Use the nylon screws and hex nuts to secure the photo interrupter boards to the inside of the 3D printed cover and bring the wires to the outside of the cover using the hole in the top left of the housing.
13 hours and 46 minutes to print the last part, 40mm/s, 0.1 layer, 30% infill.... Only to find out I forgot to update the button position as I had changed the pcb before ordering.... Anyway, the part looks nice, retro as I wanted... Gotta update the...
Here it is, the hit single that's rising in international pop charts, Hunter Irving's "I Like You". Created entirely using Nintendo LABO and custom 3D-printed Waveform Cards. https://soundcloud.com/hunter-irving/i-like-you
So it seems that the food is getting jammed in the cereal dispenser :(Potential solution: 3D print a paddle wheel with fewer paddles (4 paddles instead of the current 6)Any other suggestions that doesn't involve changing the entire outlet mechanism,...