1495 Results for "3D printing"

Software Setup
Instructions from Stereo Ninja
Currently we are assuming you are using a StereoPi (with CM3). The StereoPi comes with a Raspian image ready to be used with StereoPi and 2 cameras. Make sure you have the latest version, there is an update tgz on that wiki page....

Starfleet Communicator Badge
Instructions from Starfleet Communicator Badge
Assemble the badgebundle your wiring and place it into your 3D printed shell. Note that you might need to dremel the back of the 3D printed shell in order to adjust it make it snug.Test to make sure you have communication, then use a glue gun to set...

SAB3T - PID Loop Educational Tool
Instructions from SAB3T - PID Loop Educational Tool
Install the ArduinoYou need: - Arduino (soldered to interface board) - 3 screws - 3D Printed Central TowerInstall the Arduino oriented as shown. There are only 3 screw holes so it will only go in one way.Screw it in! The holes in the 3D print are sized...

D.I.M.E.R PROJECT 6 DOF Robot Arm
Instructions from D.I.M.E.R PROJECT 6 DOF Robot Arm
Adding some 3D partsI bought a 3D printer and started to design lots of pieces, i tried freecad, cause it's very easy, and then i discover openSCAD, so i studied how it works an desgin my own gears to DIMER, here's my final test, it's an example with...

Arduino Neopixel Watch
Instructions from Arduino Neopixel Watch
Get the watch case 3d printed or milled if you are able to. I recommend getting it 3d printed in metal from shape ways in a material that is polished as it will save a lot of work down the road, you might be able to also find a cheap watch that has the...

Strap
Instructions from Haptic Input
In the file you will find a .stl 3D file with a model for the wrist strap mounts that can be 3D printed. Drill hole though the sides matching the holes in the mount. Cut a 3mm rod to shape and use M3 nuts to secure the mount to the casing of the...

Assemble the device!
Instructions from Automated mouse homecage two-bottle choice test v2
Slide the Feathers into the 3D printed holderSnap both photo-interrupters into the 3D printed holderSlide the cover on to protect the wiring from mice!Plug in battery

Step 1: Examples of the Web Tool - The Practical and The Aesthetically Pleasing
Instructions from How to use the Web Tool in Fusion 360
The image above illustrate the different ways you can use the web tool. The image on the left shows the cross braces on my 3D printed bracket. These serve a practical purpose in that they add strength to the part. With Santa’s sleigh I used...

Measure
Instructions from Recreate lost or broken plastic items
Make accurate measurements using the caliper, a micrometer or any precise measuring tool depending on the desired accuracy. Be careful with the tolerances. Some 3D printers are extruding more material for the outer shells of the print, especially for...

Circuit Connection:
Instructions from DIY Weather Station In The Form Of Desk Plant.
*Make the connections as shown in circuit diagram. *You can use WS2812B LED Strip instead of individual LEDs. *The Data pin is connected to pin D4 of ESP8266,GND to GND and 5v to Vin of the NodeMCU. *Make sure that you use 4 LEDs for each wall(4 LEDs...

Rotation Servo installation
Instructions from 3-Axis Skull Mod for 12ft Skeleton
You will be using the 1st level (blue) 3D part labeled "Skull_Mech_V3_1stLvl" Remove the servo arm (and screw) from the servo. Type B Only: Attach the servo gear (from ServoCity) onto the servo. (Not pictured).Position the Rotation servo as shown...

Paint Components
Instructions from Star Trek Shuttle Console
Now that we have all all of the parts we can paint. I tried to keep the pieces that needed to be painted to a minimum. So the only pieces we need to paint are the top pieces, and they are all painted silver. Top Frame - laser cut 1/4" plywoodPower Grid...

Model Edge Holder
Instructions from The Interactive Air Quality Map
The 3d printed edge holder is mostly structural, it provides a way to secure the cell to the back acrylic panel, holds the led strip right against the edges of the map cells, and also partially obscures the harsh light from those edges. Add holes...

Assembling right side
Instructions from BrailleRAP DIY Braille embosser
Fix 3d printed parts BOTTOM_AXIS_right and TOP_AXIS_right on the frame with M3 washers M3 Nyl nuts and M3-14 Fix 3D printed parts KP08_support and KP08 on the frame with M5 washers M5 Nyl nuts and M5-25 screw Fix a KFL08 with M5 washers...

Finishing touches
Instructions from RETRO 1 - Home Computer Console
Although I didn't bother to sand or fill or paint any of the parts, I did feel they deserved a logo or two.So I used the Microsoft 3D Builder program to load a set of characters that can be found by selecting "Letters and Numbers" in the "3D Library"...

|<
<
46
47
48
49
50
>
>|