11 Results for "PlutoX"

Obstacle avoidance using PlutoX Rover
Instructions from Obstacle avoidance using PlutoX Rover
To build the rover based on PlutoX platform use project details https://hackaday.io/project/160363-plutox-rover For image processing part I have uploaded the algorithm. API to access camera mounted we will release in future and keep you updated...

FINALIZING COMPONENTS REQUIRED
Instructions from TableTennis Drone
PlutoXPrimusX board2 IR sensors(V53LOX)Breakout board600 mAh batteries

FINALIZING COMPONENTS REQUIRED
Instructions from HYBRID DRONE
PlutoX3D printed wheels and motor support400 rpm brushed motors600 mAh batteries

FINALIZING COMPONENTS REQUIRED
Instructions from Methane Sensing Drone
PlutoXPrimusX boardPrimusX breakout boardMQ2 gas sensorDouble sided tapeZip tie

FINALIZING COMPONENTS REQUIRED
Instructions from Clap to Fly A Drone
PlutoXPrimusX boardPrimusX breakout boardHigh Sensitive Microphone Sound Sensor Detection ModuleResistorCapacitor

GETTING THE SOFTWARE READY
Instructions from TableTennis Drone
Breakout board gives the range from IR sensors If an obstacles is encountered within 150mm, the drone moves in the opposite directionUsing IR sensors on both sides a drone can be used to play Table tennisGithub link

GETTING THE SOFTWARE READY
Instructions from Methane Sensing Drone
Breakout board gives power to MQ2 sesnor Github link to read the sensor dataConvert the input data to equivalent voltageSet some specific threshold, If the sensor data is greater than a threshold ARM the drone and Set a Specific height to take off....

GETTING THE SOFTWARE READY
Instructions from Clap to Fly A Drone
Github link to read the sensor dataConvert the input data to equivalent voltageSet some specific threshold, If the sensor data is greater than a threshold ARM the drone and Set a Specific height to take off.

GETTING THE SOFTWARE READY
Instructions from HYBRID DRONE
If the PlutoX is DISARMED (i.e in the Rover mode) Check if it is Auto-Stabilized or not (AutoStablization helps the rover to maintain the direction with the help of Magnetometer )If it is Auto-Stabilized, indicate by turning on the Left LED, get the...

GETTING THE HARDWARE READY
Instructions from HYBRID DRONE
In this project I decided to use PlutoX drone due to it’s hardware modularity. Adding most structure is easier. For my project I needed something that will hold the wheels so that I can use my drone as a rover.Using this wheel support I...

Building the Rover
Instructions from PlutoX Rover
Use fusion 360 or any CAD software to design a rover frame , a basic car body with essential mounts mounts for the flight controller , 4 motors and a 3.7 v batttery between 250 to 600 Mah.Print out this file with proper infill and material , preferably...