37 Results for "PlutoX"

FINALIZING COMPONENTS REQUIRED
Instructions from HYBRID DRONE
PlutoX3D printed wheels and motor support400 rpm brushed motors600 mAh batteries

FINALIZING COMPONENTS REQUIRED
Instructions from Methane Sensing Drone
PlutoXPrimusX boardPrimusX breakout boardMQ2 gas sensorDouble sided tapeZip tie

FINALIZING COMPONENTS REQUIRED
Instructions from Clap to Fly A Drone
PlutoXPrimusX boardPrimusX breakout boardHigh Sensitive Microphone Sound Sensor Detection ModuleResistorCapacitor

GETTING THE SOFTWARE READY
Instructions from TableTennis Drone
Breakout board gives the range from IR sensors If an obstacles is encountered within 150mm, the drone moves in the opposite directionUsing IR sensors on both sides a drone can be used to play Table tennisGithub link

GETTING THE SOFTWARE READY
Instructions from Methane Sensing Drone
Breakout board gives power to MQ2 sesnor Github link to read the sensor dataConvert the input data to equivalent voltageSet some specific threshold, If the sensor data is greater than a threshold ARM the drone and Set a Specific height to take off....

GETTING THE SOFTWARE READY
Instructions from Clap to Fly A Drone
Github link to read the sensor dataConvert the input data to equivalent voltageSet some specific threshold, If the sensor data is greater than a threshold ARM the drone and Set a Specific height to take off.

GETTING THE SOFTWARE READY
Instructions from HYBRID DRONE
If the PlutoX is DISARMED (i.e in the Rover mode) Check if it is Auto-Stabilized or not (AutoStablization helps the rover to maintain the direction with the help of Magnetometer )If it is Auto-Stabilized, indicate by turning on the Left LED, get the...

DIY Nano Drone
Details from DIY Nano Drone
This Project is done on modular drone "PlutoX" from Drona Aviation.To check click!.

The BAT
Details from The BAT
This project is done on modular drone "PlutoX" from Drona Aviation.To checkout Click!

Object tracking with a PlutoX drone
Details from Object tracking with a PlutoX drone
To learn the basics of image processing I thought the idea of making drone follow any object. To achieve this I used OpenCV module for image processing. The camera on drone gives H264 frame to android app, after that on android side frame is decoded...

GETTING THE HARDWARE READY
Instructions from HYBRID DRONE
In this project I decided to use PlutoX drone due to it’s hardware modularity. Adding most structure is easier. For my project I needed something that will hold the wheels so that I can use my drone as a rover.Using this wheel support I...

Clap to Fly A Drone
Details from Clap to Fly A Drone
What I wanted to do was command my drone to take off either by a snap, clap, or by actually saying drone fly!! For this first i began with choosing a good sound sensor and adjusting its sensitivity as per requirement. I integrated this sound sensor onto...

Hover-Craft
Details from Hover-Craft
A basic 3D printed hovercraft frame that I designed on a 3d modelling software . I put 7 mm DC brushed motors as the actuators with 55 mm bi-blade props. The setup is a 1s 3.7v setup that used a 600 Mah battery with a disharge rating of 45C. Its...

Obstacle avoidance using PlutoX Rover
Details from Obstacle avoidance using PlutoX Rover
To learn basic of autonomous system, I thought an idea of making rover avoid the obstacles. To achieve this I used OpenCV module for image processing. The camera on Rover gives H264 frame to android app, after that on android side frame is decoded to...

Methane Sensing Drone
Details from Methane Sensing Drone
I have heard many instances of deadly fires caused due to methane leakage. So decided to make a project with a thought of detecting methane leaks before hand and stopping such disasters before it happens. In this Project I made Methane sensing...

|<
<
1
2
3
>
>|