1656 Results for "Q%20%ED%85%8D%EC%82%AC%EC%8A%A4%ED%99%80%EB%8D%A49%20cddc7_com%20%E2%98%8F%ED%94%84%EB%A1%9C%EB%AA%A8%EC%85%98%EC%BD%94%EB%93%9C%20B77%E2%98%8F%EC%98%81%EB%8D%95%201xbet%E2%85%95%EB%B6%81%EC%A4%91%EB%AF%B8%EA%B3%A8%EB%93%9C%EC%BB%B5%E0%AC%B9%EC%95%84%EC%8B%9C%EC%95%84%EC%B6%95%EA%B5%AC%E1%BB%86%EB%B9%85%EC%B9%B4%EC%A7%80%EB%85%B82%C6%9B%ED%85%8D%EC%82%AC%EC%8A%A4%ED%99%80%EB%8D%A49%EB%A6%AC%EB%B7%B0%20indianocean/"

(Optionally) Add a grounded AC socket and replace the existing input plug with a grounded plug.
Instructions from Deluxe A.C. Light Bulb Current Limiter
I bought a cheap 8-foot 16/3 (16 guage grounded) extension cord from the Big Box Store and cut it, leaving 6 feet for the plug-end and 2 feet for the socket-end. De-solder the input wires to the DPDT switch and replace & re-solder with the 6 foot...

Some notes
Instructions from Hydroponics Sensor
The ESP-32 board pins operate in 3.3v levels while the Gravity pH and EC sensors operate in 5V. I inserted a simple voltage divider to shift 5v to 3.3v levels on the signal pins.

Attach the plug shim to the back of the AC plug. Orient the plug as shown in the photos and solder.
Instructions from AC Wall Adapter PCB for IoT
See photos for the proper orientation - don't install the AC plug upside down! Double check this step.

LK-99 Synthesis Instructions
Instructions from LK99 Synthesis attempts
Below are the instructions given by the original lab that claimed to produce the room-temperature superconductor LK-99:- Prepare lanarkite (Pb2SO5) - PbO and PbSO4 mixed uniformly in a 1:1 molar ratio - bake in a...

Step 1: 3D printing
Instructions from UltraTower
To build a tower you will need to print the 3D parts shown on the left of the image. The "Sensors float" part is optional, print it if you want to use the pH and EC sensors. You will need 12 times the part: "Basket". You can download the files...

Step 1: 3D printing
Instructions from UltraTower 2023
To build a tower you will need to print the 3D parts shown on the left of the image. The "Sensors float" part is optional, print it if you want to use the pH and EC sensors. You will need 12 times the part: "Basket". You can download the files...

Step 20
Instructions from DIY Decorative lamp | Home Decor Ideas
Open Shape Generator Turn Off "Hide all objects" Set Top and Bottom radius to 28 Number of Edges set to 64 Height set to 10

LK-99 Synthesis First Trial
Instructions from LK99 Synthesis attempts
Below are the steps that our lab followed during the first attempt of recreating LK-99:- Prepare lanarkite - weigh out roughly 1.7g PbO and 2.3g PbSO4 - mix until uniform in a clean beaker - transfer...

Make 20 vactrols
Instructions from PHOSPHOR Video Distortion
In order to control the video effects via MIDI, I needed a part that could override the potentiometers. For full effects, I need less than 30 ohms, to switch an effect off completely, a resistance of more than a few kohms would be desirable. I couldn't...

Step 20: Gather components for sub-sea cable
Instructions from "Mercator Origins": Sat Nav & Telemetry for Divers
Components: Blue Robotics 4-core Ping Cable (11 metres), 2 x 4.5mm WLP-M06 cable wet link penetrators including nuts, o-rings, and silicone seal, plus 2 x cut shake-proof washers, 1 x rubber strain relief boot , 2 x Micro JST 2-way female connectors....

The sun-tracking system: to have the parabol always facing the sun
Instructions from The Sun Heater
The sun tracking system consists of: 1. Two roller shutter/awning motors: These motors are industrial, easy to purchase, cheap, and with a high torque (10Nm being the lowest). Average price of each motor around 30€...

Arty a7-100t full release.
Instructions from Merlin
Load the .bit file onto your Arty using Vivado. When the monitor starts, press L, then load the firmware s-record via your favourite terminal https://github.com/mattuna15/zed-68k/releases/tag/ARTY-100T-v1.0

Screw Body35.stl (the internal AA cell lid) into Body34.stl (the AA cell block) using the M2 Screws
Instructions from Replacement Battery for Ryobi 7.2v Drill
This forms the AA cell block.

|<
<
1
2
3
4
5
>
>|