139 Results for "Reverse Engineering Blood Glucose Monitors"

PCB - Design & Build
Instructions from Bluetooth RPM Letterboard
KiCad & PCB Being my first PCB ever, I started from scratch with KiCad Like a Pro 3rd edition in Udemy which gave me a basic understanding both of Kicad 6 and of PCB design. The course author also has a playlist on his YouTube...

Try to reverse engineer the code (cheat) by looking at the assembly code generated
Instructions from Pong in AVR
Wokwi is the best Arduino simulator on the planet! Proteus is crap.

Putting the Dryer back together
Instructions from Samsung Dryer IoT Hack
Reassembly is the reverse of disassembly 😄

Insert headers
Instructions from PewPew FeatherWing
We are going for a low profile look, so we will solder the headers in reverse. Insert the male headers from the top, long side down.

construct a garden light
Instructions from DIY Landslide Warning System
Assemble the garden light in the reverse order of how it was disassembled to complete the process.

Power Up the Setup
Instructions from Model Railway Layout With Automated Siding
Power up the setup and make sure the turnouts get switched to the siding, if not then just reverse the connections of the turnouts made with the motor driver. Also, make sure the train starts to move to forward direction. Reverse the feeder track's connection...

Cost-effective alternative of the electric scooter
Instructions from O-trotti (Steam Fabrikarium)
As the scooter is quiet expensive, almost 300 dollars, we investigated to find a low cost alternative and found the following solution. Required material: - Arduino Uno (for controlling speed of motor) - Female to male wires - L239N motor driver (for...

Soldering Top SMD Components and LEDs
Instructions from Uno Plus+
Bottom Solder Layout Solder all Bottom Bottom Components First Solder LED Components - LEDs Are designed to be mounted in reverse. Some LEDs require a little force to fit in the hole in reverse.

Toner Transfer with Kapton
Instructions from Toner Transfer with Kapton
Export your board image from your PCB software in black & white and a minimum of 300DPI. Print a test copy of the REVERSE image of your pcb traces onto a blank sheet of paper. This will serve as a template for positioning your Kapton tape.

Repairing a Sony Dream Machine ICF-CL75iP
Instructions from Repairing a Sony Dream Machine ICF-CL75iP
Now, in tried and true Haynes manual-lingo, re-assemble in reverse order.Be sure to seat the ribbon cables properly. The LCD data cable is a tough one. Also, be sure that you seat the LCD backlight connector all the way, otherwise you'll have to take...

Hacking Stereo with Onion Omega
Instructions from Hacking Stereo with Onion Omega
ReassembleFollow the previous steps in reverse order to put the alarm clock back together.

USB PD Bench Power Supply
Instructions from USB PD Bench Power Supply
Wire all the pieces together. One red and one black wire connect the PD Buddy Sink to the DPH3205's power input, and one red and one black wire connect the DPH3205's power output to the binding posts. Plug the DPH3205 panel into the DPH3205 PCB, taking...

GETTING THE SOFTWARE READY
Instructions from HYBRID DRONE
If the PlutoX is DISARMED (i.e in the Rover mode) Check if it is Auto-Stabilized or not (AutoStablization helps the rover to maintain the direction with the help of Magnetometer )If it is Auto-Stabilized, indicate by turning on the Left LED, get the...

Step 18
Instructions from DIY Decorative lamp | Home Decor Ideas
Select Foundation Click Reverse Selection Open Stitch & Scoop Click on Button - Union

Remeber to Check All Diodes Before Soldering
Instructions from Arduino Amazing Interactive Snowflake
Don't forget to check all diodes at any time before soldering. It will be difficult to replace it if there is an open circuit or reverse polarity connection.

|<
<
1
2
3
4
5
>
>|