5826 Results for "X 올림피크 리옹 CDDC7닷컴 ㅿ프로모션번호 B77ㅿbepickڸ원엑스벳 슬롯머신ಣ서천복권방ṓ한화이글스오늘경기ୀ올림피크 리옹사랑 backpedal/"

Lim x---> ∞ Where x is possibilities
Log from Project BASICS
The possibilities are endliess when you add to the budget .i'll try and jot down my thoughts, and I'll modify this when I come up with new ones.1.) Get a fancy LIDAR based system , supplemented by a camera to do the same thing ., and also change the...

25.12.2020 - Voron Switchwire - X Axis - X Carriage Frame
Log from Voron Switchwire 3D Printer
My Voron Switchwire Components List: https://hackaday.io/project/174810-voron-switchwire-3d-printer#menu-components Voron Switchwire - X Axis - X Carriage Frame - PartsVoron Switchwire - X Axis - X Carriage Frame - Assembled Voron Switchwire - X...

New X-Train ready...
Log from I**A-CNC Machine
Here a small explication video how it works.

Basic X - style frame
Log from Mini-X Quadcopter Drone
This is the X - style frame I started with. I had little knowledge of quadcopters, 3D printing or electronics at this point. But it was a start...

X axis is running
Log from G-EDM
The X axis is finally running. The small Nema-17 Motor has enough power to drive the axis at all microstep settings. Pulleys and belt are printed. The ballscrew came without a nuthousing so I printed one. It is bigger and uses 4x pressed in M6 nuts to...

dim x(100)
Log from blinkyBasic
I've got dim working! It has taken a little longer due to the fact that last Sunday I got an email about one of my iOS apps not working, so I had to spend all my free time updating for iOS 9.1. Kinda sucked but if I was getting paid to be an iPhone dev,...

Marlin 1.x running on Lerdge X
Log from Lerdge 3d Printer Mainboard Hacking
With the help from Jason, Dzenik, and jmz52's help I was able to adapt my custom version of Marlin4MPMD to work with the LerdgeX hardware. The majority of the work was spent adding in the STM32F4 HAL library instead of the STM32F0 HAL library,...

X Axis actuator
Log from OpenBuilds C-Beam™ Machine Build
On to the X axis, similar to the one we just did, just longer C Beam and lead screw etc.2 X 40 mm aluminium spacers1 X 1/4"? x 8 mm flexible coupler2 X 8x16x5 bearing (688Z)2 X 8mm shim8 X T-Nuts2 X 8 mm lock collar8 X M5 20 mm bolts2 X C Beam end plates2...

x-axis scale mount
Log from Reviving a Shoptask 1720 XMTC Gold 3-in-1
The casting is a little curved at the back, in the vertical axis, so the brackets might be twisting the scale a little and will need shimming.

X dro head mounted
Log from Reviving a Shoptask 1720 XMTC Gold 3-in-1
tight fit with regular cap screws underneath. I don't have any 4mm button-heads.

Supporting X-Axis Expansion
Log from Monoprice Select Mini Electro-Mechanical Upgrades
Balance. Why is it needed? One end of the X-axis is unsupported. If you extend this out, there should be enough force to have thins begin to bend. I'm not an mechanical engineer so I cannot calculate how much the 3 Z-Axis rods will bend when you're mid...

Improvement x-axis endstop
Log from CHANGER - a toolchanger new interpreted
Because I'm not a big fan of sensorless homing I implemented mechanical endstops for the x and y axis right from the beginning. The y-axis endstop is directly implemented in the idler-belt-tensioner and therefore in the same plane of the xy-motion system....

24.12.2020 - Voron Switchwire - Gantry - X Axis Beam, X Bearing Block
Log from Voron Switchwire 3D Printer
My Voron Switchwire Components List: https://hackaday.io/project/174810-voron-switchwire-3d-printer#menu-componentsVoron Switchwire - X Bearing Block Voron Switchwire - X Beam with Left Side XZ Bearing Block Voron Switchwire - X Axis Beam - Top...

We Have X-Rays
Log from X-Ray CT scanners get new life
Watch as much as you want, but a few minutes into a 13-minute conditioning process, we got x-rays. And a much higher voltage than I was planning to reach for a while. 88 kV! 20 or so microamps! That's more than a watt! Also, I put my handy...

Pebble API 3.x
Log from Octowatch
I started working on upgrading Octowatch to be compatible with Pebble API 3.x as well as the new round watches and I've got my work cut out for me. I'm very excited about the idea but I think it's going to be a considerable re-write, so it's probably...

|<
<
1
2
3
4
5
>
>|