2714 Results for "Y 대전 프로토 베팅 CDDC7.COM ▧프로모션번호 B77▧농구경기분석ϧ에스퍼홀덤℁KB손보👢메이저리그라이브중계ӈ대전 프로토 베팅애용 assurable/"

Y axis complete
Log from Simple DIY laser cutter
I finally found more time to work on this and the Y axis is now complete, I just need to test it with an Arduino just to check that its moving OK with a stepper.

Y-Carriage Design Update
Log from Large DIY 3D Printer With All Lead Screw
Reduced the weight and footprint of the Y-Axis Carriage.Experimenting with Igus anti backlash lead screw nuts.Trying out different direct drive extruder designsI'm considering making the X and Y-axis C-Carriage designs from solid rectangular bar instead...

Y shift troubleshooting
Log from Fixing the OS12 scope
The tube driving the Y shift is V2, more specifically the pentode on said tube. With the help of a resistor divider made with R10 (kinda), P3 and R14||R15. P3 is the Y shift dial, and they drive the grid of the pentode of V2. At first glance I was shocked...

Y Axis Carriage
Log from 3D Printer
The Y axis carriage is almost complete. It still needs a spring loaded bearing to contain it from side to side, possibly add a dowel or shouldered 6-32 screw to allow for a smoother guide for the up/down containment bearing shaft, and to test the new...

Y-Axis motor module
Log from Axis
Today I finished machining and mounting the Y-axis motor module. All measurements and tolerances seem correct. Anodizing is missing, but we'll leave it for later. In a few days I will have the entire structure.

Fixing Y-axis wobble
Log from Easythreed Nano printer optimisation
X- and Z-axes both seem to be surprisingly stable and wobble-free (except for a slightly bent Z screw which I'll attempt to straighten later). However, the Y-axis has a distinct wobble, so straight edges aligned with Y end up slightly wavy. The fault...

Y Axis Mechanical Test
Log from 3D Printer
Before I could dedicate myself to using the selected scanner bed for the Y axis, I wanted to verify that the motor and mechanism was going to work. Here is a test of the Y axis.This proved it out, now to change the layout of the bed. Currently the bed...

Y Axis Change
Log from Ender 3 Artifex Edition
I had over-looked the fact that this kit was meant for an Ender 3 Pro with a 4040 Extrusion on the Y plane. The belt-drive does not at all function as intended, and after 3 days of modding I gave up on the belt. So please note, if you intend to...

3. Getting Started
Log from Plant Foliage Health Monitor
In this chapter we learn how to setup the Raspberry Pi and how to detect the peripheral of the sensor.Configuring the Pi To get started with your Qwiic pHAT, simply plug it into the headers on the Raspberry Pi with the letters facing you. We'll use the...

Y axis Mounted
Log from 3D Printer
The Y axis has been finished to the point of being mounted onto the paper tray dispenser that will become the Z axis. The up and down movement of the Y axis is limited by the spring loaded shaft that runs along the X axis. The shaft shown in the middle...

Esquematico, PCB y BOM
Log from Desarollo de Un Robot Hexapodo-UVG MT3005
Esquematico:Para el desarollo de una placa de circuitos impresa, necesitamos disenar el circuito con el que opera el control del robot hexapodo. Para lograr esto, realizamos dos propuestas de esquematicos. El primer esqumatico es en el que no se toma...

Y-axis & Gantry Assembly
Log from Building a Shapeoko 3 from Scratch
Well, the machine is finally taking shape! This week I was able to get the y-axis rails and the x-axis gantry mounted and squared up to the table.The main difficulties were dealing with a few slots that didn't line up perfectly with the threaded holes...

Y Axis Translation demo
Log from Stubby the (Teaching) Hexapod
Today I finally worked out all the bugs in the IK and servo driver software. This now allows me to set any leg at an absolute x,y,z co-ordinate (within reason, of course... there are physical limits to how far each leg can move). To demonstrate...

Y-Axis Bearing Upgrade
Log from Reviving a Shoptask 1720 XMTC Gold 3-in-1
Upgraded from a plain bearing held in with a set screw to a double row angular contact bearing.

Y Axis Bearing Change
Log from Toy Claw Machine
Up until now the Y axis has had a plastic bushing that needed constant maintaining by adding grease or increasing the amperage on the stepper drive. They have been removed and now there are ball bearings installed. Here is an overall view...

|<
<
1
2
3
4
5
>
>|