Close

249 Results for "bar robot"

  • Start Broadcasting
  • Instructions     from Zeel Radio
  • In a program like Rocket Broadcaster once you have set up everything the bar should start moving and once you press "Start Broadcast" you become on air. You can hear the sound (music) you are making in the URL of your Stream.

  • Electronics
  • Instructions     from Neopixel Vase
  • LED ring and Trinket Arduino board can be screwed into the base. The LED ring is held in place with a 3D printed bar. Soldering is straight forward:Trinket USB -> NeoPixelRing 5V Trinket GND -> NeoPixelRing GND Trinket Pin 2 -> NeoPixelRing DIN

  • Compile !
  • Instructions     from DIY Power for all - OwnTech
  • You are almost done ! The project you have downloaded already have all what you need to compile your very first project : Blinking the LED ! Click on the Compile Icon on the blue task bar on the bottom of the screen

  • Assembly of pieces
  • Instructions     from Prismatic Scara
  • The assembly between the vslot profiles is carried out by means of localized blows normally to the section plane, in order to achieve a pressure joint without glue. The following image illustrates the assembly of the vertical bar that is the axis of...

  • A "Quick 220" clone
  • Instructions     from A "Quick 220" clone
  • Prepare the mounting plate.Lay the plate on your work surface and position the relays as close as possible to one of the long edges. The three relays should have about a half inch gap between them for air circulation, and the middle relay should be centered...

  • Hand Drive
  • Instructions     from Hand Drive
  • Hand Drive Assembly InstructionsPrint out the parts(1) Annular gear(1) Bar Holder(1) Base(1) Knarp Tensioner(3) Planet Gear(1) Ratchet(1) Stacked Gear(1) Sun Gear1)Hammer in three 5/16 inch bearings into underside of the sun gear.2)Attach three planet...

  • Add storage clamp
  • Instructions     from Ceiling Mounted VR Support Rig
  • This part is optional. You can add a clamp that goes onto the swivel that will later allow you to store the entire rig up at the ceiling. 3D print the clamp pieces (rows 27 and 28). Take your 1/4in by 1/8in rectangular bar (row 30) and cut 4 3in pieces....

  • Chassis Build
  • Instructions     from Autonomous Electric Tractor
  • I started by cutting all the lengths of steel box section to length according to the chassis design. Next i made the hydraulic wheel motor mounting plates. I used a compass and pencil to mark up for the large holes that took the body of the hydraulic...

  • Modular cartesian machines
  • Instructions     from Modular cartesian machines
  • This one is the basic module that I use for the construction of the plotter XY and that I will use also for the next projects. You can see that it's the same structure of the axis Y of the 3D printer Prusa I3. Also it is possible to observe that to change...

  • Helix Winder
  • Instructions     from Helix Winder
  • Buy materialGet an aluminium tube (or rode, or irong rode, ...) with a diameter equal to D (helix inner diameter) Buy a wooden bar with thickness equal to S. Don't use light wood like pine. I used oak from an industrial wooden floor. Mahogany or...

  • An Embedis IoT Keystore for MQTT
  • Instructions     from An Embedis IoT Keystore for MQTT
  • Installing EmbedisTo Install Embedis in the Arduino IDE, please see the Detailed Install Directions. Embedis is installed using the Arduino Library Manager from the top menu bar: Sketch -> Include Library -> Manage Libraries -> EmbedisYou will also need...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday