99 Results for "cern"

Part 3 - by shlonkin
Log from Sci-fi adventure 2
After several silent minutes, a feeling of cold isolation began to saturate the tiny cockpit of the ship. Despite the temperature being precisely regulated by the environment control system, Kip wrapped his arms around his body and shivered slightly....

Open Hardware Schematic Published in Alpha version
Log from OSHW GNU/Linux PowerPC Notebook
Above all, one of the greatest problems preventing us from finalizing these schematics was the missing chassis required to take a series of very important design decisions. Finally, very recently, a chassis was selected and is now in our hands, paving...

Structured Light
Log from prism laser scanner
Claim 1: - I claim the use of two lenses which in combination focus light into a structured optical beam. Between these lenses there is a prism which can rotate so that a scanline can be formed. The first lens focuses the light parallel...

KiCad Links
Log from KiCad 101 workshop @ Hackaday SuperCon
KiCad Website : http://kicad-pcb.org/KiCad Download Link : http://kicad-pcb.org/download/KiCad Quick Start : http://kicad-pcb.org/help/getting-started/KiCad Documentation : http://kicad-pcb.org/help/documentation/KiCad useful tools : http://kicad-pcb.org/help/external-tools/kiCad...

Towards a more open level
Log from level: A New Kind of Radio Module
Today I made a few changes that make level more open than before. First, I added support to building with msp430-gcc in addition to Code Composer Studio. That means that a lot of the supporting libraries and code that was under TI's license is now under...

It works!
Log from AVR-ZIF Programmer
Hello everybody,after I fixed some broken connections on my self-etched PCB, it seems to work so far I could test. I tested an ATTiny 13, an ATTiny2313 and an ATMega8, so it should work with their respective MCU-families, too. I could not the ATMega...

Project created on OHWR !
Log from VHDL library for gate-level verification
https://ohwr.org/project/microsemi-libIt seems the CERN people are exploiting and even expanding the library. We need to agree on a few conventions to keep all our projects compatible.A new feature appeared, where errors are injected in flip-flops...

2020-08-30 Progress Update - New PCB v1.1
Log from BlueRetro
Just finished the changes to the PCB design base on what I discovered with the first version.I've change the ESD chips for a little bit bigger ones with a pin pitch of 0.5 mm instead of 0.4 mm. Not a big change but should be less likely to short. The...

State of array of microphones
Log from Sesenta: Open source tileable acoustic camera
Two versions of the microphone Array have been tested, the latest version is ready for production (KiCAD files in the repo). The second version of the controller card is being assembled, we hope to test it soon (KiCAD files in the repo). We are ...

Log 4: Choosing PCB software
Log from Squidpad
I have only ever used eagle to design my PCB’s. It has suited me fine for the three years that I’ve worked with it, but its limitations bundled with the lack of advanced functionality, such as push and shove routing is starting to get on my nerves....

Making PCBs again: STM8L051F3P6 with nRF24L01+
Log from eForth for cheap STM8S gadgets
Edit: I made a new HaD project for this :-)My first PCB after 25 years, and the first PCB I ordered ever. OK, just a breakout board, but at least I made it with KiCad 5.0.0.rc2, and I ordered it from @oshpark. I must say that PCB tools have come a long...

How to Enter
Log from The Square Inch Project
Entry is simple!Read the rules.Start working on your project! Make sure it fulfills the requirements listed in the rules.By November 24, 2015, post a link to the hackaday.io project page here.By December 1, 2015, post design documents on your project's...

Testing out KiCad and my Issues with EasyEDA
Log from ZTO-80 Computer System
Up until this point in the ZTO-80's development, I have been using EasyEDA as my main EDA program for making schematics and laying out PCBs. It works well and has all of the features I need while still being very easy to use. It also has simple integration...

D-DAQ Mainboard Design Released!
Log from D-DAQ
My sincere apologies if anyone has been waiting for this. I've had work and personal relations come into play so they past 3 days I've needed to put up my files has been next to nil. Right now I'm remoting into my computers at home to make a simple zip...

Tricopter simulation
Log from Modular Unmanned Vehicle Controller
After moving to another city, the development of the system PCBs had to be halted for some time. Due to a lack of space, I had to focus most of the work on this project on the computer. My new job created an opportunity to revive a n-body simulation...

|<
<
3
4
5
6
7
>
>|