60 Results for "circuitpython"

USBnunchuck_mouse
Project by esp32beans
Convert Wii Nunchuck to USB mouse without soldering using CircuitPython
- 2
- 1

RGB Cube Circuit Sculpture
Project by Hari Wiguna
An LED Cube "floating" inside an Acrylic case
- 36
- 32

Busy/Free Desk Indicator
Project by DeckerEgo
A busy/free desktop indicator for the Adafruit Circuit Playground Express. Red shows you are busy and for how long, blue shows you are free!
- 4
- 7

revving up a Kinesis foot pedal
Project by kristina panos
No driver? No problem!
- 6
- 13

Android Circuit Python Editor
Project by foamyguy
Use a USB OTG cable with Android devices for Serial, REPL, and a basic code editor for use withCircuit Python Boards.
- 66
- 48

Brake Light and Turn Signals for Backpacks
Project by Estudio Roble
Accelerometer autodetects Braking. The Turn signals are commanded by a 315MHz module. 78 neopixels. Based on Adafruit CPX.
- 3
- 3

Yorick the Mimic
Project by Aspiring Roboticist
A 3 axis skull mimics the movements of a person wearing a baseball-cap mounted Inertial Measurement Unit and wireless communications
- 13
- 17

Baby Monitor Haptic Mod
Project by Guy Dupont
Adding a motor driver and BLE to a cheap VTech baby monitor to enable alternative outputs - like haptic feedback!
- 0
- 0

Control RPi over I²C w/RPi Pico
Project by durapensa
Pico Pi Controller - I²C monitoring & control of Raspberry Pi 4/3/Zero by a Raspberry Pi Pico.
- 1
- 3

PICOmputer&Armachat TOUCH
Project by bobricius
Raspbery Pi PICO and CircuitPython
- 20
- 20

Code the badge in CircuitPython
Instructions from BornHack Bubble Badge
You can write the code for the QTPy SAMD21 in anything you want. However the nice thing about CircuitPython is you get an interpreter to test your inflating and color animations live on the badge. As well as allowing anyone with an USB-C cable to make...

BPI-PicoW-S3 Getting Started, Code CircuitPython with Mu Editor
Log from The BPI-PicoW-S3, A New Player in Town
BPI-Pico-S3 has the same dimension as the Raspberry Pi Pico board, equipped with an ESP32S3 chip, an 8MB flash, 4-layer PCB, electroplated half-hole process, ceramic antenna, supports 2.4 GHz Wi-Fi and Bluetooth® LE dual-mode wireless communication,...

FeatherSnow
Details from FeatherSnow
The link to Jiří Praus' Arduinoflake. The link to LuckyResistor's SnowFlakeProject.After connecting FeatherSnow with your computer using a USB cable, a drive named "CircuitPython" will show up. You can drag your circuitpython file to the...

Installing and updating the fermenter code
Instructions from An open-source fermenter
Installing CircuitPython Download CircuitPython from circuitpython.orgConnect your board with a good USB data cable.Click on the BOOSTSEL button and connect your board to your computer. From here you should see a new device called RPI-RP2 connected to...

Circuit assembly
Instructions from USB Pedal based on Rpi Pico
The circuit was built using components of TUSISTEMITA, like enclosure backplate, and Rpi Pico screw terminal breakboard. Once the app is downloaded for the first time, and electrical connections verified, the backplate could be attached to the enclosure...

1
2
3
4
>
>|