Close

147 Results for "fix"

  • ColecoVision Fix + Wireless Controller Hack
  • Hacker page     by Discreet Mayor
  • This project falls in the "can I just get this working" category. No real intention of making it "nice", or even using it...! A while ago, I recovered my childhood ColecoVision from storage in a barn. It had been sitting there for a few decades, along...

  • HOW TO FIX OP-AMP OSCILLATION
  • Hacker page     by lion mclionhead
  • It dogged the lion kingdom forever.  First, it was the AD4817 making an 80Mhz sine wave.  The AD4817 appeared to have a capacitive load & responded to higher feedback resistors.  Higher R went against internet wisdom, but detuned it by...

  • Methods to Fix Epson Printer Not Connecting Mac Device
  • Hacker page     by withusprint
  • Is your Epson printer not connecting to Mac? The Epson printer not connecting to the Mac device issue can be caused by various reasons. The Mac can’t find an Epson printer when you have a low internet connection, communication between printer and mac,...

  • How to fix Epson Printer Error code 0x97
  • Hacker page     by chris110john
  • The Epson printer error 0x97 is an error code alluding to some issues in the printer hardware. A malfunction in the printer motherboard or some other internal hardware could result in the display of this code. If you are facing this error code, feel...

  • A Two-Bit Fix to a One-Grand Tool
  • Hacker page     by Lauri Pirttiaho
  • As computers and operating systems age and are replaced with "better" ones it frequently happens that we lose access to some old (but not obsolete) software, or worse yet, to hardware devices, that do not have any replacement available. Or if they do,...

  • How To Fix Your Broken Onion Omega2 Board For Only $3.20
  • Hacker page     by zakqwy
  • Yes, it is broken. Step One is to accept this fact:Above: a $5 Linux computer that uses 2mm header pins, meaning it requires a $10 - $15 dock to use.Step Two is to bitch about the problem on Hack Chat (you have to scroll back a few weeks to see the post)....

  • Why is my stepper motor skipping steps and how to fix it?
  • Hacker page     by Mark Liu
  • Stepping motors are often used for precise positioning, so it is very important to ensure that the motor does not lose its step. The stepper motor can control the position and speed of the motor open-loop according to the pulse number and pulse frequency,...

  • fail of the week
  • Hacker page     by jeff
  • my pants zipper broke.the zipper is brass. "I can solder brass", I say. a cut here, solder there. I can fix this.it turns out, you cannot solder pants.:-(

  • Beaglebone Black 3v3 Regulator Bug
  • Hacker page     by jlbrian7
  • Used this fix: https://groups.google.com/forum/#!msg/beagleboard/7sxPePT7wkM/_oNSCta5WusJ for this problem, as recommended: https://elinux.org/BeagleBone_Power_Management Seems to be working well.

  • Canon Printer Error
  • Hacker page     by George more
  • The Error Code B203 indicates that there is an empty ink cartridge. Now, if your Canon printer is running on two different kinds of ink cartridges. Then, it might possible that one of them is empty and that is creating this error on your system..Visit...

  • Motherboard
  • Hacker page     by stellazoe48
  • What causes my motherboard failure? The system does not display anything and an error code appears and also one or more beeps occur when start my computer? What is the reason for this? How can I solve that issue. Can it fix or I have to purchase and...

  • BlueSCSI Single Sided PCB
  • Hacker page     by danjovic
  • Working with a friend on a Single Sided PCB for the BlueSCSI hard drive emulator. Schematics have been redrawn on Eagle. Added USB fix resistor for Blue Pill, used 2 different footprints for the Micro SD card.Uses the form factor of a 4 inch bay hard...

  • Hacking myself
  • Hacker page     by davedarko
  • I have a bad motivator and some broken energy cells to fix. I see a lot of repeated hacks, that I have never done myself and yet I feel tired looking at all of them and everything related with soldering. Maybe this is because of my work that takes a...

  • Summer Plans
  • Hacker page     by TAIBHSE DESIGNS
  • So I finished my college exam (yes one...............marketing...................) a few weeks ago, I think I'm fairly confident I passed, the plans for summer however anyways is portfolio work and projects, because I have work placement during second...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday