Close

483 Results for "password vault"

  • Set up your Raspberry Pi
  • Instructions     from ChatGPT for Discord
  • Set up your Raspberry Pi Zero 2 by using the Raspberry Pi Imager for MacOS to configure your internet network, and enable SSH with the user pi and the password pi, then install Raspberry Pi OS Lite to run headless.

  • VMware vSphere Client on Mac
  • Instructions     from VMware vSphere Client on Mac
  • Run Client and Connect to Host• In Terminal navigate to the folder where the client exe is located (not the installer):cd ~/.wine/drive_c/"Program Files"/VMware/Infrastructure/"Virtual Infrastructure Client"/Launcher/• Then run the Client with this command:wine...

  • Download the code
  • Instructions     from Distance monitoring with Arduino & AskSensors IoT
  • Download the code from the Asksensors Github page.Decompress the code and change the following lines with your setting: String ssid = "............."; //Wifi SSID String password = "............."; //Wifi Password String apiKeyIn = "............."; //...

  • WiFi Aurora
  • Instructions     from WiFi Aurora
  • Login to the Pi using the keyboard. The default password is "raspberry".Upgrade Raspian like this.sudo apt-get update sudo apt-get upgradeTo enable WiFi, modify the following file.sudo nano /etc/wpa_supplicant/wpa_supplicant.confAdd the following lines...

  • WiFi Aurora
  • Instructions     from WiFi Aurora
  • Configure Raspian which only needs to be done once.sudo raspi-configExpand FilesystemChange User PasswordBoot Options: B1 ConsoleInternationalization: I1 Change localeUncheck en_GB.UTF-8 UTF-8Check en_US.UTF-8 UTF-8Default locale: NoneInternationalization:...

  • KilnShark
  • Instructions     from KilnShark
  • Connecting to WiFi:Everything in this section is made possible with tzapu's WiFiManager. Turn on the KilnShark and then check available WiFi networks. It should show up as "KilnTempSetup". Connect to it and enter the password ("password" is the default...

  • Wi-fi Controlled FPV Rover Robot
  • Instructions     from Wi-fi Controlled FPV Rover Robot
  • Install the latest Arduino IDE. In this project stepper.h library was used for the control of the stepper motors. No additional library was needed for communication with ESP-8266 module. Please check the baudrate of you ESP8266 and set it properly in...

  • Have data in wifi with AD8232 and wemos
  • Instructions     from Wireless ECG
  • We search to have a wifi signal. So we use the following code on github called "Code Wemos wifi"  to connect it to the computer via router.Don't forget to put the IP of your computer (line 20) and the name and password of your router ( line 43...

  • Write the sequence you want to automate
  • Instructions     from Netflix automated log in
  • Once you decode the necessary buttons, arrows and OK button in my case, you can program how to "navigate" the keyboard.The keyboard starts at "g", it is as simple as 3 times right button and OK for pressing a "k". With this logic you can enter your complete...

  • Connect Pedalino to a WiFi network
  • Instructions     from Pedalino™
  • AppleMIDI, ipMIDI and Open Sound Control (OSC) protocol requires a network connection. Pedalino support IEEE 802.11 b/g/n WiFi with WPA/WPA2 authentication (only 2.4 GHz). Pedalino implements Smart Config technology via Espressif’s ESP-TOUCH protocol to...

  • Connecting Via Bluetooth
  • Instructions     from WiFi Connection to a Raspberry Pi
  • BerryLan will now establish a connection to your RaspberryPi via Bluetooth. It should be a relatively quick process (a few seconds). Once a successful connection has been established, you will see a list of the available WiFi hotspots around you. In...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday