395 Results for "phone"

Phone Holder
Instructions from Joy Robot (Robô da Alegria) 2017 edition
The phone holder is a single 3d printed part, and it takes around 1 hour to print. The robot has a smartphone at it's belly. It was designed for a Motorola Moto E. It has a 4.3" display. Other smartphones with similar size might fit as well. The phone...

Cell Phone App
Instructions from Power Monitoring for your Mobile Home
I built a cell phone app to complement this project as I feel that we are entering an age when everyone expects their electronics to seamlessly connect to their phone. A cell phone app offers convenient access to real-time electricity data...

Connect Mobile Phone
Instructions from Ameba Arduino: BLE – BLE Battery Service
On your mobile phone, open the Bluetooth app and scan for the Bluetooth signal broadcast by Ameba, it should appear as a device named “AMEBA_BLE_DEV”. Connect to the Ameba Bluetooth device, and a list of available services should appear....

Install app on cell phone
Instructions from Affordable Speeding and License Plate Recognition
Download the radar gun app onto your smartphone or tablet. The app is free. It asks for usage of your camera and location. The location is added to the information overlaid on the images by the app. The app will place the date, time, speed, and location...

find a cool rotary phone
Instructions from Dial-a-Memory
This is the easy part and the hard part. You can find them in many places, including eBay or occasionally still thrift shops. But finding one you love could be harder. The parts of the electronics you'll use in this project are not...

Testing in Android Smart Phone
Instructions from Arduino Game Controller For PC and Android
Connect the Joystick Your Smart Phone Using OTG Cable. In Android Only Few Games are Supported //List of Supported Games//Bridge Constructor Portal Crossy Road Endurance Evoland 2 GRID Autosport Horizon Chase Levelhead Minecraft Oddmar Portal Knights...

Print and assemble phone case
Instructions from Multispectral imaging smartphone camera
Printing of all parts is done is PETG. All parts needed for assembly of case: Case Case back/magnetic attachment Filter wheel base Filter wheel nut M3 thumb screw M3 nut 3/8" to 1/4" tripod mount adapter 8x3mm magnets (x4)-----------------------------------...

Disable notification sounds on your phone
Instructions from Hush Owlet
On Android, wait for an alarm to occur on your phone, then long press the notification and go to settings. Then tap each of the alarm bells on the left to silence each type of notification.

Test which frequency your phone works on
Instructions from Cell Phone 4G LTE Repeater / Booster / Femtocell
Use a SDR (Software Defined Radio) to find out which frequency band your phone works on. This is actually really good fun and much easier than it sounds. The SDR costs about $24 and can be used with open source software such as GQRX with gives you a...

Install the Mirru App on your phone
Instructions from Mirru
Head over to the android store and download our app.

Finding and modifying a suitable phone
Instructions from Less than $100, high FOV, mobile AR glasses
Required is a phone with a long flex cable leading to one of the cameras. In my research Chinese MIX smartphones are most suited. These have flex cables of ~10cm to the front camera (which is located at the bottom of the phone, instead of the top). You...

Assemble the Cell Phone Booster kit
Instructions from Cell Phone 4G LTE Repeater / Booster / Femtocell
The kit comes with a few 'easy to solder' components, so solder them on, being careful to get the voltage regulator the right way round. The flat part of the regulator faces away from the board.

Load the Program and Connect your Phone
Instructions from Make-A-Pede
Library and Remote Control Program Installation Instructions PDF Phone Connection and First Run Instructions PDF Additional Resources Arduino IDE (Windows) Arduino IDE (Mac OS) GitHub Repository

Download Blynk app on your mobile phone
Instructions from Gutters to Gardens
We used an app called Blynk to allow remote access to the controller of the TechTOWER via a mobile device. The app uses a simple, drag-and-drop interface that requires no coding experience. Using the application builder within Blynk, an individual can...

Screen cast your phone media to your AR HUD
Instructions from Cyborg 360 Flir AR HUD Motorcycle Helmet
https://www.thewindowsclub.com/teamviewer-remote-access-control-software-windowsYou can resize the window and place it wherever you like in the AR hud, personally I would size it down and put it on the far left or right of the visual area. Any area you...

1
2
3
4
5
>
>|