1325 Results for "raspberry"

Prepare the Raspberry Pi with Raspberry Pi OS
Instructions from Off-Grid Garden Watering System
Flash a copy of Raspberry Pi OS onto an SD card. The 32-bit Raspberry Pi OS Lite version is sufficient. At this stage, it is convenient to configure for WiFi headless access to the Raspberry Pi over the local WiFi network. To do so, in the /boot...

Setting up the Raspberry Pi
Instructions from Intelligent Door Lock (Alexa & Face Recognition)
Prepare your Raspberry Pi with latest Raspbian operating system and get ready to do some programming. If you are new in Raspberry Pi read this how to get started using Raspberry Pi guide. You can plug a mouse, keyboard, and monitor into your...

Setup the Raspberry Pi Host
Instructions from Kitchen Timer
After installing the library and connecting the hardware, you can now compile the source code and run the program on the Raspberry Pi. Follow the procedure below.After Downloading the file, open the terminal and go to the folder which contains this file: Kitchen-Timer-Code...

Install MXNet on Raspberry Pi
Instructions from MyHouse - Smart Doll House
First, you'd need to install MXNet on your raspberry Pi. Here are the instructions: https://mxnet.apache.org/get_started?platform=devices&iot=raspberry-pi& After you have MXNet working, download my repo https://github.com/msurguy/MYHouse-smart-dollhouse...

Setting Up the Raspberry Pi
Instructions from Voice Controlled Glasses and Magnifying Lens
n this step we need to setup the Raspberry Pi Zero. This is very strait forward and I recommend the following guide that uses the NOOBS software to write the Raspbian Operating System on the SD Card. Please note that there are some differences, since...

Assembling the Raspberry Pi Case
Instructions from Tree-Pi: Raspberry Pi Christmas Tree Monitor
Finally, we can install the Raspberry Pi. First, solder the wires and a 2x20 socket (on the underside, not visible in the pictures) to the strip board. Use the wiring diagram PDF and the picture below to guide you! If you do make an error, do not worry...

Setup the Raspberry Pi 4
Instructions from Monsterrhino printer car
Download a pre-installed Raspberry Pi image with the already installed CAN and display driver as described here: https://github.com/Monsterrhino/MonsterrhinoControlDownload the Python3 GUI software (https://github.com/Monsterrhino/MonsterrhinoMotion/Projects/MonsterrhinoPrinterCar/python3)...

Configuration of the Raspberry Pi
Instructions from Connected Trash Can
[Needed : microSD reader, network, USB-C to USB cable, power source] The whole configuration process has been explained in this log : [Extra Session] Focusing on the network and code environment (Raspberry Pi 4). Follow those steps...

Connect Raspberry Pi Pico Pins
Instructions from Standalone T9 Predictive Keyboard
Connect wires to pins:GP9, GP10, GP11 (These will connect to keypad column pins)GP12, GP13, GP14, GP15 (These will connect to keypad row pins)

Install FadeCandy on your Raspberry Pi
Instructions from NeoPixel Guitar Hero
https://learn.adafruit.com/1500-neopixel-led-curtain-with-raspberry-pi-fadecandy/raspberry-pi-setup Follow the above guide on Adafruit Learning System

Install Speedify on the Raspberry Pi
Instructions from Raspberry Pi IRL Streaming Hotspot with Bonded LTE
Follow the guide here: https://speedify.com/blog/how-to/install-speedify-raspberry-pi/

Setting up the Raspberry Pi
Instructions from Mouse Controlled Mouse Controller
For this project I used a Pi Zero. Because this was my first Raspberry Pi, and because the USB and HDMI adapters were so expensive, I bought a kit that came with the adapters and an SD card preloaded with Raspian. This made everything a lot...

Download a Raspberry Pi Image
Instructions from STARTEC REGISTRO
Think of the Raspberry Pi as a tiny computer. We'll need to install an Operating System to be able to use it. To do so, we'll need to download an operating system. To do so, first download the Raspberry Pi OS Imager here. Install the software after it...

Raspberry Pi 3 UART Pins
Instructions from BP Classification with vocal result raspberry Pi
Configure UART on Raspberry Pi In Raspberry Pi, enter the following command in the Terminal window to enable UART, sudo raspi-config Select -> Interfacing Options After selecting the Interfacing option, select the Serial option to enable UART Then it...

Log into the Raspberry Pi.
Instructions from Raspberry Pi networking the systemd way
If you have a monitor and keyboard connected, simply log into the Pi with username pi and password raspberry. Otherwise, if using Ethernet over USB emulation (Pi Zero W only), do the following: a) Make sure Avahi/Bonjour service is running....

|<
<
2
3
4
5
6
>
>|