6430 Results for "smart+outlet"

Hack Chat Transcript, Part 1
Log from Vacuum Tube Logic Hack Chat
Hi everyone, welcome to the last Hack Chat of 2020! I'm Dan, I'll be moderating again today for David Lovett, aka Usagi Electric, and we're going to be talking about Vacuum Tube Logic, or pretty much anything about vacuum tube circuits. David, can you...

Hack Chat Transcript, Part 1
Log from Finishing Your Projects Hack Chat
OK folks, here we go. Welcome to the Hack Chat, I'm Dan and I'll be moderating today for Zack Freedman. We're going to talk about follow through on projects and actually finishing some of the projects you've got on your bench for a change. We're also...

Hack Chat Transcript, Part 1
Log from Haptics Hack Chat
OK, greetings everyone, let's get started. I'm Dan, I'll be moderating today along with Dusan as we welcome Tim Szeto from Nanoport Technology to talk all about haptics. I think we'll be hearing from Kyle, too, who's a mechanical engineer there. Tim...

Hack Chat Transcript, Part 1
Log from Robot Dogs Hack Chat
Dan Maloney11:09 AMHi all, Hack Chat starts in about 50 minutes: Dan Maloney11:09 AMhttps://hackaday.io/event/181633-robot-dogs-hack-chat HACKADAY Robot Dogs Hack Chat Afreez Gan will host the Hack Chat on Wednesday, September 29 at noon Pacific. Time...

Hack Chat Transcript, Part 3
Log from Resin Printing Hack Chat
Andrew Sink12:39 PMI've made mechanical assemblies printed fully dense on the Mars 2 Pro, and shrinkage was not something I had an issue with Thomas Shaddack12:39 PMThe radical polymerization leads to sometimes fairly significant shrinkage. (Low single...

Hack Chat Transcript, Part 1
Log from Spatial AI and CV Hack Chat
Dan Maloney12:00 PMGreetings all, welcome to the penultimate Hack Chat of 2021! I'm Dan, and as usual I'll be modding today along with Dusan as we welcome Erik Kokalj to the chat. Erik works on spatial AI at Luxonis, and we're going to go into depth...

Pebl - the complete IoT package for makers
Details from Pebl - the complete IoT package for makers
During our time away, we've been busy. We were being asked left, right and center if we'd be offering the Pebl for sale on our website despite not meeting our goal. Unfortunately, the answer was no as we just couldn't afford to do so :( However,...

Irrigation Level Assessment by Thermal Imaging
Details from Irrigation Level Assessment by Thermal Imaging
Since there is already an imbalance between the irrigation demand and the available water resources[1], it is crucial to avoid poor irrigation timing and insufficient or extravagant applications of water, which are unfortunately rife in agriculture....

Arduino Nano 20KHz Digital Portable Oscilloscope
Details from Arduino Nano 20KHz Digital Portable Oscilloscope
Previously, I posted a tutorial on Raspberry Pi-Pico Oscilloscope. And that was a great success. Keeping portable options in mind, I found this pretty mini oscilloscope between thousands of pages of a Japanese website. We are using a mini-OLED 128X64...

O3 & BLE Weather Station Predicting Air Quality
Details from O3 & BLE Weather Station Predicting Air Quality
Although many factors can lead to poor air quality, the two most common are related to elevated concentrations of ground-level ozone and particulate matter. Ground-level ozone forms when nitrogen oxides (NOx) from sources like vehicle exhaust and industrial...

Hack Chat Transcript, Part 1
Log from Logic Simulation Hack Chat with Al Williams
Dan Maloney12:00 PMOK, folks, good afternoon/evening/morning to you all. We're ready to kick off the Hack Chat! I'm Dan, I'll be moderating today along with Dusan for Hackaday's own Al Williams! Dusan Petrovic12:00 PMHi everyone! Dusan Petrovic12:00...

GSM & SMS Enabled Water Pollution Monitor
Details from GSM & SMS Enabled Water Pollution Monitor
📌 Why is water pollution a global issue? Since we incessantly pollute our limited water resources, which are already drowning in chemicals, waste, plastic, and other contaminants, it is crucial to eschew water pollution before it is too late...

Hack Chat Transcript, Part 1
Log from 2022 Hackaday Prize Hack Chat
Dan MaloneyApr-13 12:00 PMHello everyone, welcome to the Hack Chat. I'm Dan, I'll be moderating today along with Dusan as we talk about the 2022 Hackaday Prize with Majenta Strongheart. Dave BlundellApr-13 12:00 PMha_proxy is another good way of doing...

IoT 3D Printer Motion & Status Tracker w/ Telegram
Details from IoT 3D Printer Motion & Status Tracker w/ Telegram
Since the Creality CR-6 SE does not have Wi-Fi or an early warning system to monitor the printer motions and status, I decided to create a device to track the printer's lateral and vertical motions while printing so as to get informed of potential malfunctions...

Low Code GPS Asset Tracker and Map Display
Details from Low Code GPS Asset Tracker and Map Display
Story Recently, I joined the IoT startup Blues Wireless as a staff software engineer. I had no Internet of Things experience prior to this - sensors and microcontrollers and breadboards were not the kind of development I'd been doing. But when...

|<
<
425
426
427
428
429
>
>|