36 Results for "solder fume extractor"

A Self-Driving Car using a Raspberry Pi Zero
Project by Richard Crowder
Using Ogma Corp's EOgmaNeo machine learning library, we created a tiny vision-based self-driving car, powered by a Raspberry Pi Zero.
- 76
- 47

Introduction to SMT Stencils service.
Details from Introduction to SMT Stencils service.
When we go on large scale production of electronics modules, sensors and other Pcb circuits. We need some machines to do heavy tasks. But if the production is limited to some hundreds of Pieces, then assembling components took a lot of time. Unequal...

what's next
Log from LAMEBOY - another ESP12 handheld
This needs a generally tested, breadboarded prototype, or at least it should. I've added 2.2mm drill holes where I could for later case designs to screw on, but I'm not sure about them. A beast to layout and probably more to solder! Seems to make sense...

Deconstruction Reconstruction
Log from Famicube
Honey, I shrunk the Nintendo! If I wanted to make Arne's concept art real using actual Famicom hardware, I needed to think hard about miniaturization and where space could be saved. Earlier revisions of the Femidom's main board were thankfully small...

IR Home Automation
Hacker page by ykelectrical499
INTRODUCTION Hello Guys welcome back to another interesting blog of YK Electrical. In this blog we will see how to use an automated Lighting System using IR sensors which is also gesture controlled. COMPONENTS REQUIRED IR Sensor (2 Qty.)DPDT Relay ...

Memory Card
Log from WDR-1-Bit-Computer
With the mainboard taken care of, and a proper bus pinout defined, I decided to tackle the memory as next target. Compared to the original, I don't plan to use the old-style Intel 2112 RAM chips, but instead went for the cheapest non-volatile storage...

Wonderlandscape
Details from Wonderlandscape
The flasher circuit was harvested from a toy. These flashing wands are glued together, and the batteries are "not replaceable". The only way to get inside one is to break it open. I've never successfully opened one without ruining the clear plastic...

Designing a pcb prototype
Log from Open FFBoard
While the current prototype shows promising results it is a mess of wires and many pins on the stm are already blocked by the discovery board. Other boards where the powerstep shield can be stacked onto often have no usb port or other issues. I spent...

DIY Motion Triggered Halloween Prop usin Digispark
Details from DIY Motion Triggered Halloween Prop usin Digispark
Circuit Now, lets me show you the circuit first! The input power is connected to a 7805 regulator. 7805 is a 5V regulator which will convert an input voltage of 7- 32V to a steady 5V DC supply. So, you can connect an input voltage of anywhere between...

Gnarfle the Garthok
Log from DECAL
This looks overly complicated, and it is. Mostly because I need to learn the maths involved with flexible architecture, but also because its the only way I can skin this beast without using proprietary software.The skin geometry is only the beginning.In...

Building the button pad
Log from Teensy Beats Shield
Multiplexed button/LED board I wanted to create a button pad with at least 16 pushbuttons, and ideally, an LED per button to show status. The easiest way would be a Teensy pin for each button and LED, but that would be at least 32 gpios. The...

Hooking up a 7" 1024x600 px TFT display (GDTE070A1-6)
Hacker page by helge
7" displays with 800x480 and 1024x600 px resolution are not taller than 107 mm and are an elegant fit for HMI terminals as well as custom machinery and even 3U rack mounted servers and lab equipment. Their versatility and power efficiency hinges on the...

My own Arduino Nano Microcontroller board
Details from My own Arduino Nano Microcontroller board
Here is my new Arduino Nano board, This looks better with C-type and one step above compatible drivers. I faced many problems in making the PCB, but I think PCBWay is the solution to all of them with their prototype PCB capabilities. And looks of the...

Tiny Motion Detection Alarm
Details from Tiny Motion Detection Alarm
intro Hi, in this project we are going to make a motion detection alarm with IMU 6050, it is a 3-Axis Accelerometer and Gyro Sensor module. By using this, if small movement is detected by the IMU , it will trigger a sound in the buzzer . Basically it...

NeoTrellis Explorations
Details from NeoTrellis Explorations
The Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad is a board with i2c connections and an array of 4x4 button pads, each with a NeoPixel (RGB). Adafruit also sells number of accessories and kits around the board. The ...

1
2
3
>
>|