0%

0%

JO70

me

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 06/07/2020.

Projects I Like & Follow

An Odrive + steppers based construction, with 5x 3D printed hollow shaft reducers and an internal CAN network.

Atlas - 6DOF 3D printed universal robot

damian-lickindorf Damian Lickindorf

A simple point-and-shoot near-IR camcorder built with a raspberry pi

Near-IR Camcorder with a Raspberry Pi

A low-power E-Paper weather display powered by an ESP32 microcontroller. Utilizes the OpenWeatherMap API.

ESP32 E-Paper Weather Display

Single rotor, "human-safe", selfmade ball-drone with air vanes for position control

The Ball-Drone Project

benjamin-prescher Benjamin Prescher

Supplyframe DesignLab: 2023 Hackada…

A cheap but precise Weather Station (Lora transmission)

Long Range Weather Station (65€)

jp-gleyzes JP Gleyzes

Experimental case testing 3D printed "waterproofing" and water resistance.

Water Resistant 3D Printed Enclosures

An open-source hiking, pilot, skiing, Signal-App-extending GPS mesh communicator.

Meshtastic

Supplyframe DesignLab: 2022 Hackada…

Ultra low power monitoring of temperature, humidity, pressure, reed contacts and motion. With Encryption!

Canique Ambience

canique canique

Compact and lightweight tracker using the Astrocast communication module and u-blox CloudLocate service

AstroTracker MINI

raphael-valceschini Raphael Valceschini

Supplyframe DesignLab: 2023 Hackada…

Rezodo aims at building a distributed irrigation system and a weather station with farmers. It's also a fully open platform for IoT learning

Rezodo: Long Range irrigation and weather station

jp-gleyzes JP Gleyzes

When do your flowers have enough water, and how do you know?

Soil moisture monitoring in a flower garden

joseph-eoff Joseph Eoff

(OUTDATED) Simple clear face shield design to help protect providers from COVID-19

Laser Cut Medical Face Shield ABV4

Andrew Blackstock

An Indoor Air Quality System with E-Paper Display, LoRa communication and WiFi AP configuration

Hermetis

manuel-alfonso Manuel Alfonso

Open Design Ultra Low Power Sensor Tag for light, temperature, humidity and pressure. openthread on Zephyr with json to MQTT and Grafana

Openthread Sensor Tag

T12 Soldering Station based on ATmega328P

Soldering Station

stefan-wagner Stefan Wagner

Hackaday Prize 2020

When you absolutely, positively got to kill every Microbe in the room. Accept no substitutes.

Ultraviolet Lightsaber. Kill COVID-19 with Style.

chrishicks Chris.Hicks

We will make a LoRa based GPS tracker and connect it to the TTN, this gives your GPS Tracker maximum range without internet.

LoRa GPS Tracker Tutorial | LoRaWAN with Dragino

akarshagarwal98

Adding a WiFi, NTP and MQTT remote control & measurement unit to a storage heater.

IoT Storage Water Heater Control

keri-szafir Keri Szafir

View all

Bits

JP Gleyzes wrote 08/31/2023 at 06:10

thanks for following #Long Range weather station

Are you sure? yes | no