This user joined on 04/28/2014.
Create an account to leave a comment.
Already have an account?
Hello AJW, thank you for taking the time to look at my CUBEx8 project. https://hackaday.io/project/165465-cubex8
I have many more project logs to post as I explore design trade offs and choices. Thanks again!
Are you sure? yes | no
Thank you for your interest in my #wESP32: Wired ESP32 with Ethernet and PoE project!
Thanks for following #nRF52 Custom Sensor Nodes . The SW is currently working and tested, if you'd like to check it out and have questions, let me know.
Hi, Thanks for following # Box for Resume 3D Print automatically
Thanks for following #Modular Open-Source AV Receiver, and good to see another Aussie on here!
Thank for following ArduGen, I hope you' ll enjoy it and i' ll be more than happy to listen to your ideas and suggestions :)
thanks for the follow!
Thanks for following.
If your interested, the code was built on "Blink without Delay()" type logic so it is quite generic as I wanted to port from an UNO to a WeMos D1 (ESP-12E) without worrying about timing hardware.
The Ticker library I find is quite generic so I intend to re-code for this soon.
If you interested in CNC/GCode then you may find my GCode Filter useful, particularly for laser engravers.
If you have any questions/suggestions just ask/say.
I have one of those "useless" lamps that you have in your photo.
I splashed out and bought a proper one! Money well spent!
I gather you are West Australian?
Howdy, yo! Thanks for the follow!
Thanks for the follow on SunLeaf!
thanks for the follows!
Create your Hackaday.io profile like AJW and many others
© 2020 Hackaday
You are about to report the user "AJW", please tell us the reason.