Bluebird Labs Doug Peters-
Bluebird Labs
03/17/2021 at 15:07 • 0 commentsBattlab-One by Bluebird Labs
As a designer of embedded battery powered devices, I often find myself in need of tools that would enable me to build better products more efficiently. Unfortunately the tools I need are often too expensive – so I ended up creating Bluebird Labs to develop tools that are within the reach of the everyday engineer/designer/tinkerer. Bluebird Labs is entirely open source and I encourage you to take what I’ve built and improve upon it. I hope that you will find my products to be helpful and useful in your designs!
Doug
![]()
-
Bluebird Labs
07/09/2020 at 17:38 • 0 comments![]()
Battlab-One by Bluebird Labs
As a designer of embedded battery powered devices, I often find myself in need of tools that would enable me to build better products more efficiently. Unfortunately the tools I need are often too expensive – so I ended up creating Bluebird Labs to develop tools that are within the reach of the everyday engineer/designer/tinkerer. Bluebird Labs is entirely open source and I encourage you to take what I’ve built and improve upon it. I hope that you will find my products to be helpful and useful in your designs!
Doug
My Pages
Things I've Built
Battlab-One A design tool for capturing current profiles of battery powered devices and estimating battery life for products/projects.
Projects I Like & Follow
Lutetium
David Prutchi
hkdcsf
Moritz Wenzel
Arvind Sanjeev
Kevin Harrington
ByteTech
marvin
Shane Burrell
Michael Bilenko
William
Malte Ahlers
M. Bindhammer
Edgaras Art
Darcueid
Fabio Balzano
Hatterofthewaste
Yunsup LeeShare this profile
ShareBits
Hi Doug, I guess average will do if you are on the linear part of the discharge curve.
Making a couple of measurements at different points on the curve will probably work fine. Should be possible to figure out if there is a Ldo or DC/DC in the design.
Helge
Hi, really nice project. What happen if you add a buck-boost converter between your battery and your design? Current will not be constant from 4.2 down to like 3.2 volt. Same applies if there is no ldo to keep the load current constant. This could influence battery lifetime a lot.
Yes you are correct Helge. I am currently working on a solution to address the issue. I've thought in the meantime just averaging the two (4.2V and 3.2 V), not sure how close that will get to an estimate of battery life. I'll will post once I have new software to address that issue.
Doug