Build Instructions

Collapse

• 1

  Launch skiiiD and select Arduino UNO

  #1 Launch skiiiD and select New button

  #2 Select ①Arduino Uno and then click ②OK button

• 2

  Add Joystick Component

  #1 Click '+' ADD button to search and select component

  #2 ① search Joystick on search bar and ②Click Joystick Module, 

  #3 then you can see ③ pin indication. (You can configure it.)

  #4 ④ click ADD button  

• 3

  Four Functions of Joystick

  #1 Original skiiID library provides 4 functions

  1) getHorizontalData - Indicates Horizontal position of Joystick Module as the numeric value (range : 1~10) .

     EX) If Joystick is on the far left position, it will be 1 on the serial monitor, vice versa.

  2) getVerticalData - Indicates Vertical position of Joystick Module as the numeric value (range : 1~10) .

     EX) If Joystick is on the far down position, it will be 1 on the serial monitor, vice versa.
  

  3) getPosition - Indicates position of Joystick Module as the numeric value (see below)

  4) isClicked - Indicates states of joystick is clicked or not.

View all 3 instructions