COMPLETE PROJECT WITH A CHIP ELECTRONIC PARTS

ARDUINO

COIN ACEPTOR (USED FROM OLD MACHINE)

POWER SUPPLY

6 RESISTORS

RELAY 12 V

MECHANICAL COIL FROM DING DONG MECHANICAL BELL.

BOM ( bill of material):

-arduino NANO

-relay 12v or 5 v

-10k resistor 5 pcs

-4,7k resistor 1pc

-100nF 250 v capacitor

-transistor Bd135 or any with simiral characteristic

-power supply 12v 1 A

-DING DONG mechanical bell 220 v (coil used for mechanical part)

-Coin acceptor SR-3 moneycontrols or simiral with same outputs signal (100ms) in this case.

Demonstration video:

COIN ACCEPTOR MONEYCONTROL SR-3

INSTRUCTION MANUAL AND HOW TO PROGRAM :

http://slot-tech.com/interesting_stuff/money controls/TSP005 SR3 Type 1 TM V4[1].2.pdf

If someone like to make this project and like to get source code contact me on e-mail kukurikuus@gmail.com

Regards!