0%

0%

FLoRa - IoT for all...

FLoRa is a project and ecosystem to bring IoT to the masses, particularly farmers and those in remote communities.

Andrew

Following Follow project

Liked Like project

Become a Hackaday.io member

OR

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

The 2015 Hackaday Prize

Description

Low cost, low power, sophisticated IoT platforms using COTS products.

Components

2 × Arduino Pro Micro ATmega32U4 3.3V 16Mhz Base board for LoRa sensors.
1 × Raspberry Pi 2 Model B Data Cocentrator
1 × TP-Link TL-WR703N Wireless Access Point
3 × Wireless SX1278 LoRa Module, 433Mhz, 3.3V LoRa wireless module to be used in the wireless sensors.

Project Logs

Collapse

[06-Aug-2015] Cleaning up the LoRa-RX module
Andrew • 08/06/2015 at 11:24 • 0 comments

Made some changes to LoRa-Rx with an interface that looks alot cleaner
[05-Aug-2015] Github Repo up and going
Andrew • 08/04/2015 at 23:24 • 0 comments

Check out the first prototypes of our wireless sensor and firmware on our github page.
http://flora-iot.github.io/project/

View all 2 project logs

Discussions

seilerjacinda925 wrote 11/19/2019 at 15:38

Hi

Nice to meet you after viewing your profile i am Jacinda, from (jakarta) indonesia,

i have a project discussion with you please email me on: (jacinda.seiler@yahoo.com)

Are you sure? yes | no

Joehunt wrote 03/29/2016 at 05:14

LoRa range up to 15km

Are you sure? yes | no

zakqwy wrote 08/07/2015 at 18:50

No relationship to this?

https://www.adafruit.com/products/659

Are you sure? yes | no

Andrew wrote 08/09/2015 at 23:51

No - this is not a wearable like the one you link to. LoRa is a LPWAN protocol, check it out: https://en.wikipedia.org/wiki/Lorawan

Are you sure? yes | no

zakqwy wrote 08/10/2015 at 14:28

Cool! Range/bitrate?

Are you sure? yes | no

Similar Projects

Ultra Low Power Arduino Wireless Sensor Node

Ultra Low Power RF Node

Charles Charles

This project replicates a sine wave and demonstrates the absolute basics of using TensorFlow Lite.

TensorFlow Lite - Hello World

An open implementation for a SDI12 Sensor node, based on Ultra-Low-Power Bluetooth CPU

Open-SDI12-Blue

In AP mode, Ameba can accept at most 3 station connections.

Set Up WiFi AP Mode