Nikon D5100 to Adafruit Ultimate GPS adaptor

An adaptor board to connect Adafruit Ultimate GPS to Nikon D5100 DSLR camera

Similar projects worth following
The project features the inexpensive Attiny 85 microcontroller to convert baud rate and filter the verbose nmea stream of Ultimate GPS to fit to the 4.8 Kbaud/sec serial line of camera. The microcontroller software is based on the Dual rate soft uart code of Dangerruss . (
The hardware uses a modified shutter connector for the camera. The modification is described here:

Enjoy this project?



Priven Michael wrote 09/21/2015 at 11:59 point


There is a similar project that uses bluetooth to send GPS coordinates to Nikon camera

You can use externa BT GPS module or use your smart-phone to send GPS coordinates over BT


  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates