Close

279 Results for "%E3%80%8A%EB%AC%B8%EC%9D%98 OIO-5793-7458%E3%80%8B the33%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%D1%86 %E3%80%8A%EB%AC%B8%EC%9D%98 OIO-5793-7458%E3%80%8B %E3%83%8Bjim%E3%85%99the33%EC%85%94%EC%B8%A0%EB%A3%B8%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%C4%B8fire the33%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EC%84%A0%EB%A6%89the33 the33%EB%9E%80%EC%A0%9C%EB%A6%AC%EB%A3%B8%E3%82%A1%EA%B0%95%EB%82%A8the33%E3%8E%8Fpointed%E3%83%A9"

  • Measurement bridges: results interpretation

  • The interpretation of the measurement results should be discussed in particular. What should be done after the cable fault location has been searched and the distance to the defect has been measured? First, it is necessary to find the scheme where the...
  • Test ESC stuff

  • I'm building a BLDC ESC based on EFM8BB2 running BLHeli_SNCP81253 Gate DriverSIZ322DT NFET pairand a DMN2990UDJ fual NFET for level shifting between 3V3 (MCU) and the 5 V gate driver logic Link to current schematic (possible error in MCU to level...
  • HOME AUTOMATION ARDUINO AND BLUETOOTH

  • INTRODUCTION:- We all have various automatic houses and places and are very fascinating and attractive so today I am going to tell you how you can make your own home automation with the use of Arduino and Bluetooth module. It is very easy to make and...
  • Attempting to get a PBX phone to power up without a PBX

  • Backstory: A relative's workplace has recently upgraded their phone system and I got handed an old Panasonic KX-T7636 desk phone that was going to be thrown out.The desk phone has a POTS jack in addition to the PBX line jack.  It didn't come...
  • Small Signal Motor Driver

  • This article explains how you can build a small signal motor driver. A signal is entering the input of the circuit and is amplified with three transistors to drive a low current motor. This circuit can be connected to an AC amplifier. The AC amplifier...
  • Test LED

  • This website shows simple test LED circuit that you can use to detect DC or AC small voltages. The AC signal will cause the LED to blink unless the frequency is above 100 Hz.You can also use a 1.5 V light bulb because 1.5 V light bulbs can turn on at...
  • What is a closed-loop stepper motor?

  • The so-called closed-loop stepper motor is the additional encoder of the stepper motor to realize the high precision and low jitter function of the servo motor, so it is called the closed-loop stepper motor. In most cases, the stepper motor is open-loop...
  • Serial Auto Reset mod

  • If you have ever tried to use a third party serial module to send info to an ardueno you may know that generic $1-4 adapters on eBay just don't wok, unless you press the reset button at the perfect time during upload. Or you have gotten this error below...
  • Creator Ci40 dev board

  • Creator Ci40 is a development board based on a cXT200 chip optimized specifically for IoT applications which contains a dual-core, dual-threaded 550 MHz MIPS interAptiv CPU with 32k I&D L1 cache and 512k L2 cache and an IEEE754 Floating Point Unit coupled...
  • Bad Ultrasonic Biasing

  • This article is about a bad ultrasonic biasing.Some experts would not agree with my statements in this article.The circuit below is a bad ultrasonic biasing design:In the circuit the ultrasonic sensor is modelled with infinite output resistance. In practice,...
  • Making Soft Bubbles

  • Intro Soft robotics is a field that has fascinated me for the longest time. Though the research field is maturing, I still haven't seen many hobby level soft robotic projects. Starting with no prior experience, a little more than a year ago I got to...
  • Drums Project

  • DRUM: The drum is a member of the percussion group of musical instruments.  In this project we are using electricity so that's relate to electrical engineering. Some of the following things are used that are given below :  1. Arduino. 2.DC...