Close

200 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ 《〈 문의 OIO↗5793↗7458 》〉 ㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

  • DIY PWM Driver
  • Details     from DIY PWM Driver
  • In this Project, I will show you how to make PWM Controller. I'm using the laminator for the toner transfer method. What things you will need: Copper - clad board (Dual Layer) Ferric Chloride (FeCl3) Acetone (Nail polish remover) Glossy Paper LASER...

  • Photon
  • Details     from Photon
  • Commercially available UV curing systems can be divided into: UV FLOOD CURE SYSTEMS - LOCTITE UVALOC 1000 Flood systems are used when illumination of large surface area and/or large thickness of UV sensitive compounds are needed. Due to the high power...

  • Coaxial8or [gd0144]
  • Details     from Coaxial8or [gd0144]
  • Media  Inspiration and/or examples of working principle Render simulation of Cyan filament; Cyan coating of White filament; Cyan coating of Magenta coating of White filament; Magenta coating of White filament and finally Magenta filament. Image...

  • Watercolorbot with a laser
  • Details     from Watercolorbot with a laser
  • This Project is to add a 2 watt laser module to the WaterColorBot.The Lasers power and controls go through a arduino.The laser will activated by a micro switch which is under the holder (the holder is where the laser and heatsink will be mounted)

  • 100w LED projector conversion
  • Details     from 100w LED projector conversion
  • This project started some months back. I was given two projectors, one with a bulb, one without. Not wanting to scrap either unit, equally not wanting to spend £100 on a bulb that would be prone to shock and likely to fail, I decided a more serious...

  • High Voltage Scource
  • Details     from High Voltage Scource
  • The project started out as a 555 timer based flyback driver.  I wanted easier control of the frequency and duty cycle, so I decided an Arduino was needed.  Normal Arduino PWM frequencies are far too slow for a flyback, so I used a library that...

  • AM/FM Transmitter Pair
  • Details     from AM/FM Transmitter Pair
  • ===============STATUS===============AM Status - Version 1.0 - Arrived with no plated holes, guess OSH park can only handle 1 drill file, oops... drilled the holes myself, got useful prototype info and poof that it worksVersion 1.2 - Much better,...

  • MicrOven
  • Details     from MicrOven
  • So i really wanted a warm cookie at my desk one day.Rev-01so i took apart a cupcake tray and got the cup. I wrapped a beaker warming nicrome wire around it and cemented it in place with fire place caulk. It was a 150W heater and i found although it cooked...

  • R/C 1:7.5-scale Ariel Atom
  • Details     from R/C 1:7.5-scale Ariel Atom
  • Frame Ultimately, I have been looking at using some sort of metal (steel or aluminum) tube in a combination of 5/16", 1/4", and 3/16" sizes for the frame of this beast. The frame's tubes in the model have been sized accordingly, albeit solid for model...

  • pxlWindow
  • Details     from pxlWindow
  • Hello! This is my infinity mirror/window project. I hope you find it informative and entertaining.I'll start off with a quick video of the final project. This is running a relatively simple 12-band EQ preset on Jinx.We started with 200 WS2812Bs, and...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday