729 Results for "Reverse Engineering Blood Glucose Monitors"

Toner Transfer Fuser From Cheap Laminator
Details from Toner Transfer Fuser From Cheap Laminator
Latest Status Update: I have discovered a laminator on ebay for $60 (AUD) that has plenty of room inside and looks like it may heat to 170 - 200 °C. So it may well fit the need straight out of the box. I'm expecting it to arrive in the week starting...

Solar & supercap charged LoRaWAN IoT device
Details from Solar & supercap charged LoRaWAN IoT device
I've started, using the links supplied, with getting an ATMega chip running on 8MHz with use of internal oscillator .Then I tested with the blink sketch to see if it worked.Using a multimeter I checked if the solar panel was supplying voltage and I used...

R6Pedals
Details from R6Pedals
(Sorry, Automatic Google Translation)I've been giving the Rainbow Six Siege a few days, and the truth is that I did not quite hook up to a game (well, removing the DOOM, which also had its own). Well, the thing is that Rainbow Six (R6, from now on) is...

Play PC Games on Android
Details from Play PC Games on Android
Mobile is our life. I personally have started to find myself using my smartphone both for business and for entertainment much more often then a PC, even if it is within my usual reach. What if I could also play my favorite PC games on Android, right...

LoRaNicator
Details from LoRaNicator
Project Write-Up Tiny note: maybe my English sucks a bit, but I hope you can understand the most of the text below :-) A couple of months ago, I wanted to experiment with LoRa modules. I started with a breadboard, two AI-Thinker Ra-02 LoRa modules, Nokia...

Blue Board #01
Details from Blue Board #01
BlueBoard#01 is... A 100mm by 100mm board that's for prototyping and one-off projects that use SMT and through-hole components. An earlier prototype Features 19 standard footprints2 x 1.27mm pitch footprints (10 pads, 28 pads)1 x 0.65mm and 0.635mm...

IP control for inexpensive line following robots
Details from IP control for inexpensive line following robots
Project Goals: . Interesting for at least most of the grandchildren. Quick enough to be completed during our summer week together. Not too expensive, since 9 * (expensive) = prohibitive and I need one for myself, too. Simultaneous control to allow racing...

Simple Line Follower using Arduino
Details from Simple Line Follower using Arduino
Creating a Line Follower Robot using Arduino Nano Well, guys this is one of the project that never gets old. This was the first thing I did when I started learning about Arduino. An Arduino Line Follower Robot – A Line Follower Robot Using Arduino UNO...

Moisture Measurement System with Alert
Details from Moisture Measurement System with Alert
Bill of Materials Analog Soil Moisture Sensor For Arduino Arduino UNO Jumper wires (generic) Standard LCD - 16 x 2 Blue UTSOURCE Rotary Potentiometer 10k Introduction In several residences, it is common to find jars with different types...

Graphic Representaton of Heart Rate Variability
Details from Graphic Representaton of Heart Rate Variability
Simply speaking if the heart is compared to an engine, when in idle mode it does not maintain steady rpm; that means, intervals between heart beats at rest are not exactly the same, they have some pseudo-random variability. When the heart works with...

Micro Binary Clock
Details from Micro Binary Clock
Although the display area is limited in the amount of data that can be shown at any one time, it lends itself ideally to the display of bit data. As such there is sufficient area to display 4 x 4 bit binary words to represent time with notifications...

Raspberry pi tracking cam
Details from Raspberry pi tracking cam
After years of waiting for Nvidia confusers to come under $100, the cost of embedded GPU's instead rose to thousands of doll hairs, putting embedded neural networks on a trajectory of being permanently out of reach. Both goog coral & Nvidia jetsons...

Enecsys Microinverter Monitoring
Details from Enecsys Microinverter Monitoring
1 Intro The Enecsys Gateway is a Zigbee gateway allowing communications between the Enecsys microinverters and their monitoring backend. The Enecsys company is unfortunately defunct since 2015 and their DNS domains have been taken over by a UK enecsys...

Starfighter- Cyberdeck radio/carputer
Details from Starfighter- Cyberdeck radio/carputer
10/06/22 update: I didn't provide enough details on this project before, so I'm editing this for clarity and to cover a lot more specifics. It turns on!!! My car is very special to me, and I spend a lot of time driving it, but the one issue that always...

At-tiny Test Using Arduino Ide
Details from At-tiny Test Using Arduino Ide
The high-performance, low-power Microchip 8-bit AVR® RISC-based microcontroller combines 8 KB ISP Flash memory, 512B EEPROM, 512B SRAM, six general purpose I/O lines, 32 general purpose working registers, one 8-bit timer/counter with compare modes,...

|<
<
45
46
47
48
49
>
>|