- First, collect all the necessary components (as seen in components list) - Now as for soldering the components together you can either do it out of the case or in the case. I soldered all the components out of the case using very thin enameled copper...
or the "chasis" we will be using the 3D software Fusion 360 https://www.autodesk.com/products/fusion-360/students-teachers-educators (free for students)(You can use another one, as long you don't do any thing to complicated they are pretty similar).1)...
Step 7: AUTOMATE!The key part of smart home is to create automation workflows that will connect your devices together according to pre-programmed scenario.Let’s do that by using two great tools, Stories app (in Prota OS) and IFTTT (If This Then That).Connect...
Motivation I have a 3D printer made in China running days and nights at home without monitor. I doubt if it has a proper fire hazard protection. So I decided to add some intelligence to override its power supply. Two features I want: 1. Shutdown...
The following tools and materials were used in this project: Solder iron and wire. I had to solder some terminals to Nunchuk's wires in order to connect it to the Arduino;Shrinking tube. Some pieces of shrinking tube were used for a better...
I am going to use the Tuya IoT platform to develop a smart device from scratch. The simplicity and fast response time of the Tuya IoT cloud are amazing, all you need to do is set up function definitions, design app panel, and burn authorization firmware,...
Install the Arduino IDE and ensure that the ESP32 Board manager is installed. If you're not sure how to do this, you can refer to this article: Installing the ESP32 Board in Arduino IDE.Make sure you have the DFRobot/DFRobot_RTU (github.com) and cdjq/DFRobot_EnvironmentalSensor...
1. Make the cable guide. Cut a 6-flute section out the 36" 10mm Corex sheet, and then make scores (not cuts) at 1" intervals, starting at one side, and moving inward 18". Use a razor blade and straight edge to make scores perpendicular to the flutes...
We use a combination of RepetierHost https://www.repetier.com/ and Slic3r http://slic3r.org/ to prepare the gcode. Both are free open source actively supported programs. (In this way you can teach/learn the real 3d printing tool path...
Coffee machine HackProject has been done in Amiqual4Home Equipex Creativity Lab - https://amiqual4home.inria.fr/We worked with ENSIMAG students of Café Sourire ProjectTo hack : Saeco Intelia Coffee MachineDescriptionYou purchased a Saeco Intelia...
Hi, I am Vishal Soni. I am an electrical engineer, check out my youtube channel, I hope you will like it. I make lots of projects with limited resources, So this time I made a “Batuni - The Talkative Messenger Robot”. Batuni is the hindi...
Since I focused on building a budget-friendly and accessible mechanical anomaly detector that detects sound-based mechanical anomalies and diagnoses the root cause of the detected deviations via object detection so as to notify the user via SMS, I decided...
Hello everyone! In this smart watch era, where people are forgetting about old watches, I decided to create a watch that is both digital and has a vintage look. So I created digiPclock. Buy this digiPclock from Tindie Store. By the way, subscribe to...