917 Results for "3D printing"

Print
Instructions from Solar Powered LoRaWAN GPS tracker + phone charger
Export the design to STL and then use a 3D printing slicer SW like CURA to slice the model. Then send the design to the 3D printer. (When 3D printing visors make sure to use PETG plastic. When we tried using PLA plastic the visor wasn’t as durable)

The top 3D-printed Raspberry Pi cases
Instructions from The top 3D Printed Raspberry Pi cases
If you are looking for the best 3D-printed Raspberry Pi cases, then you have come to the right place. In this article, we will be discussing the top 10 3D-printed Raspberry Pi cases that are available in the market. We all know that the Raspberry...

Step 5
Instructions from Elephant Holder
Use Magix fix to prepare our model for 3D printing, set value 250

How to 3D Print a Colored Baby Groot
Instructions from How to 3D Print a Colored Baby Groot
Model PrintingDownload address of model: http://pan.baidu.com/s/1gfP3GYZ (Baidu Netdisk)Printer used: OverLord pro 3D printerModel printing. Cura setting parameters are shown below:

Step 2.1: Assembling the 3D-printed case
Instructions from Multi-Model AI-Based Mechanical Anomaly Detector
After printing all parts (models), I fastened the external battery (Xiaomi 10000 mAh power bank) into the main case via a hot glue gun. Then, I attached the PCB holder to the removable top cover via M3 screws and nuts. After mounting the PCB holder,...

My first copter build with RPi2 and Emlid Navio2
Instructions from My first copter build with RPi2 and Emlid Navio2
3d printing of the case and anti-vibration mount. I should say that Emlid has an anti-vibration mount model only for 450mm frame. In my case I had to redesign it for 250mm. 3d model for case I've taken from here. Within the project I've attached files...

Send the PCB to Print
Instructions from DIY $8 Mechanical Numpad
The PCB is the main component of the build. So the first thing you want to do is send the PCB to print. Some manufacturer provide free printing services of 1 board per month. If you have a chance to get such promotion discount, you can get a PCB for...

DaFunc
Instructions from DaFunc
The case can be 3D printed, although some modifications may be required based on any changes that are made to the design.STL files are provided for printing directly and OpenSCAD files have been provided to make any modifications easier.

Scale Model
Instructions from Fl'Air
Based on the line drawings, a scale model was prepared using 2mm wire. We can use different things to make the scale model such as PVC pipes, electrical conduit or 3D printing.

Prepare other necessary parts
Instructions from Make a Mecanum wheel by yourself！！！
You still need some necessary parts except the 3d printing parts. Please refer to Components. The other necessary parts you need to assemble a Mecanum Wheel are shown in the figure below.

3D Printed Stepper Motor
Instructions from 3D Printed Stepper Motor
Print the octagon stator and dodecagon rotor. You can download the 3d printing files here.

How To Make Your Own Personalized Power Bank (3D P
Instructions from How To Make Your Own Personalized Power Bank (3D P
Use a 3D printer to print the following model;Notice: This model is printed with transparent PLA plastic.Download the 3D printing document.

Building the Crop Water Stress Sensor
Instructions from Crop Water Stress Sensor
Like for most builds, these instructions start with the suggestion to fire up your 3D-printer and to start printing the 3D objects. I can recommend to use material that will last long outdoors and doesn't degrade with the weather conditions such as PETG...

Printing with Facemasks
Instructions from 3D Printing and Moulding with Recycled Facemasks
Polypropylene (PP) is notoriously difficult to 3D print as it doesn’t bond well to common printer build platforms. However, it does bond well to itself, PP. A trick is therefore to print on normal clear tape as this is often also PP. Using this method...

Otto DIY
Instructions from Otto DIY
Step 2: 3D print settings Otto is very well designed for 3D printing, the files that you had downloaded are property oriented and centered, so wont give you trouble if you follow this common parameters: Recommended to use a FDM 3D printer with PLA material.No...

|<
<
4
5
6
7
8
>
>|