Close

917 Results for "3D printing"

  • What are M5Stick and M5Stamp?
  • Instructions     from ESP32 BLE Communication
  • M5Stack is a technology company that designs and manufactures anopen-source development toolkit, including hardware, programming platform, and IoT solutions. It was founded by Jimmy Lai in 2017 and isbased in Shenzhen, China. M5Stack created the M5Stick...

  • The sensor box central component setup

  • Instructions     from Crop Water Stress Sensor
  • Let's start with the insides of the sensor box: Screw the 8 6mm screws into the support frame: Then add 6 regular 5mm spacers and two with the screw end to the other side of the support frame: Add the solar power management unit to the left side of the...

  • Kite
  • Instructions     from Kites for Future - Flying Wind Turbine
  • The kite is simply a wing. It has no dihedral. All our tests with diredral resulted in an aerodynamic pendulum in the launch/hover phase. When the kite moves left-right it is forced to roll due to the dihedral, which is undesired. Instead of dihedral...

  • Assembly
  • Instructions     from CRT-Style Pi Portable — Pi Terminal
  • Step 1 It's time to install all the heated inserts and start putting this thing together. Start by placing the main bezel face down, insert the display followed by the back plate and secure it with the 6 M2.5 x 5mm screws. Then connect the driver board...

  • Assembling the Trundlebot
  • Instructions     from Trundlebot - The Educational Robot
  • First gather all the parts you need. The assembled Trundlebot PCB from aboveRaspberry Pi Pico or compatible2 X 28BYJ stepper motors3D printed parts (2 X “Wheel”, 2 X “Motor Holder” and “Trundlepad” from the files...

  • Acknowledge the BOMs, Tools and Skills required
  • Instructions     from Generative kAiboard
  • The Bill-of-Materials I will say it straight away: duplicating this project is not cheap. It is unfortunately not for the penny-pincher who'd like to save some money by building it's own cool keyboard. You can probably get away with very decent keyboard...

  • Daisy Kite Airborne Wind Turbine
  • Instructions     from Daisy Kite Airborne Wind Turbine
  • Read over this system design note...Daisy Project System DesignIntroductionThe Daisy project is an attempt to realize competitive open source airborne wind energy generation.Project Executive SummaryThe Daisy project is part of the rapid AWE development...

  • Hackaday Prize Q and A
  • Instructions     from OPEN Power
  • i. Is this a unique solution to a particular challenge facing the world today? Power Supply and Oscilloscopes are an Invaluable pieces of equipment for Engineers, Hobbyist, and Student.  It allows them to test their circuits under a variety of voltage...

  • Add the GPS module
  • Instructions     from Raspberry PI wireless Telescope Control
  • Now it starts to get a little bit more difficult. My GPS module arrived and this will require some light soldering. This is how to connect the module to the PI: GPS ModuleRaspberry PIPIN on RaspberryVCC3.3VPIN 1 or PIN17GNDGNDPIN 6 or any other GNDRXDTXD...

  • Basic tips and tools
  • Instructions     from Making your work social media ready
  • - Do not put graphics over your photos, or, make sure I can crop them out. I **WILL** tag you if the information is available, but I won't share your watermarked image.  - Clean your lens.  Especially if you're photographing...

  • Pre Processing Original Image
  • Instructions     from Automatic Reading Machine
  • Once the image is captured, the system applies a sequence of computer vision algorithms in order to improve the quality of the picture. The main objective here is to make the text in the image as evident and recognizable as possible, which is essential...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday