This is an instruction manual for building a Desktop prototype version of the SALEM printer. SALEM has been designed specifically for construction 3D Printing applications so this desktop version is for demonstration purposes only and does not function...
Press fit the bearing into the stator and then press the rotor into the bearing. I was pleasantly surprised how well the bearing press fit into the stator. When 3d printing, holes tend to want to shrink inward and end up smaller than expected so I usually...
The planned 3D case.Intention is to have the case snap together without fasteners.I had couple of tries printing unsuccessfully, however, its really a work in progress. Once I am able to produce a functional case, I will share the STL files.
Box preparation : The box must contain all the components and allow a modularity. It also must take into account the power supply warming and the vibration of the centrifuge.The files for 3D printing the tube holder are available in the link in the Details...
Below is a list of all the machinery needed to hand build the enclosure for the project. Note that CAD files are attached of the enclosure if you prefer 3D printing it. Bandsaw Hot wire strip heater Sander
Next step is to 3D print all the parts for boxing for the electronics. You can find all the necessary STL files attached to this project. After printing box-bottom, box-top and box-spacer take 03962A Lithium battery charger module and superglue it to...
Attach bottom center piece of screen frameFusion 360 object path: "References"/"Screen with Extrusion Frame"/"Printed Mounts"/"Bottom Edge Center"This piece carries most of the weight of the screen while open. So when 3D printing this piece, consider...
This is the draft drawing for the V 01.0b Platform with M4 setscrew which secures the Raman probe to the base of the platform. The holes on the platform are there on purpose for 2 reasons, 1 for cost savings on material when 3d printing and 2 they are...
Print all of the parts in the package. For your convenience, they should be printed in one piece. Place all the models on a print bed so that supports will not connect to the outer surface of the case. It is enough to print parts with 0.2 mm thin layers...
It is better to print models from HIPS filament. It is not expensive and very handy for sanding. Prefer to choose dark colors of filament - it will be easier to see where on a surface you need to sand more. Best choice is black color. Same is for color...
Start by 3d printing the components given in the "files" category. I included the design files (Fusion 360) for anyone who wants to alter them. The red base attaches to the servo horn using 3mm screws. The servo horn attaches to a "giant high torque...
Some essentials are Photo Mount / Display Mount, Cardboard 9single or double corrugated is fine), Sticky Tape, Hot Melt Glue, Scalpel and Ruler. As mentioned, 3D printing is not essential, but you can get into that later, if you have / access...
3D Printing and the WeatherPiIn building the WeatherPi Solar Powered Weather Station, we saw a couple of parts that we decided it would be good to 3D Print. In the 6 months since we bought our SwitchDoc Labs MakerBot Replicator, we have totally changed...
3D-print the case for RISA. I am personally using a μDelta 3D printer. I don't have that much experience with 3D-printing, so my prints didn't come out very nice, but that doesn't matter.For me, printing the parts involved loading the .stl files,...
The next step is the placement of the parts on the PCB. I am not too interested in an optimal placement because my intent is to illustrate the general idea for this contest. The only few things I will consider is that ultimately the parts on this...