The PCB:Once I had used the program Fritzing to design the PCB, it was sent off to a PCB manufacture to be produced using the isolation milling process. The PCB is single sided as a double sided PCB was not needed, due to the fairly low component count...
Completed PCB: Once I had all the components and had received the PCB, I assembled it and carried out some basic multimeter tests ensuring no short circuits were present (mainly ensuring no pins had shorts to the ground plane). No issues were present...
Prepare clock2a. Drill 6mm hole in Deltron 479-0160 enclosure2b. Super glue 3xAA battery golder into the enclosure2c. solder 3.5mm jack to wires and connector, heatsrink it2d. prepare PCB2e. populate PCB2f. Super glue PmodGPS module into the enclosure(note:...
The Prototype is built using a standard-sized 160mmx100mm breadboard, It basically combines three modules. The XportPro, the STM8S105 uC and the VS1053 (the final device will utilize an VS1063)The STM8S105 comes premounted on the pcb of the STM8S-Discovery...
Obtain or produce the sub assemblies pictures above (See github for detailed assembly instructions, gerbers, and STLs): Polycarbonate front cover. Encoder PCB, Top housing, LCD, Knob, Main PCB, Paddles, Battery, Bottom Housing, screws and washers.
LoFi is expected to be delivered ready-to-use (prepopulated and preprogrammed). These instructions are for people that want to build LoFi themselves from scratch or are interested for curiosity. These instructions are expected to change as the project...
Open the PCB layout folder and locate desired PCB you'd like to have made. For example, LoFi-PCB-Layouts/Sender/LoFi-Sender-v7.zip. Drag that zip file onto the OSH Park web page to upload it.
AAAARRRRRGGGGHHH! There's a confirmed but with editing project instructions that affects reordering. I've spent hours trying to get them straight and complete. I'll update once the bug is fixed, but for now you'll have to pretend you're watching Memento...Remove...