121 Results for "%EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%EC%9D%B4%EB%B2%A4%ED%8A%B8%E2%86%B2optime4%E3%80%82com%EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC %EA%B0%95%EB%82%A8%EB%A7%88%EC%82%AC%EC%A7%80 %E2%86%B2 %EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%E1%98%AE %EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%EC%83%9D%EA%B0%81%E1%98%AE %EA%B0%95%EB%82%A8%ED%9C%B4%EA%B2%8C%ED%85%94 %EA%B0%95%EB%82%A8%ED%82%A4%EC%8A%A4%EB%B0%A9 %ED%83%80%EC%9E%84"

Arduino or Wemos Code
Instructions from WiFi Signal Strength Scanner Monitor or Checker
In the arduino code set your WiFi credentials char wifissid[] = "ENTER YOUR WiFi SSID HERE"; char wifipass[] = "ENTER YOUR WiFi PASSWORD HERE"; Normally, the signal strength is displayed in dBm. But for a non techie person, the signal strength in terms...

Trying out GATTTOOL
Instructions from Reading a bunch of BLE sensors with raspberryZero
Now that i know how to access and decode the data lets try the Raspi GATTTOOL default BLE handler:Native to Debian and a lso to a bunch of linux distros or so i've heard of . First i reset the bluetooth of the raspi, just in case: sudo service bluetooth...

Some notes
Instructions from Hydroponics Sensor
The ESP-32 board pins operate in 3.3v levels while the Gravity pH and EC sensors operate in 5V. I inserted a simple voltage divider to shift 5v to 3.3v levels on the signal pins.

Create the Software Stack for your Bespoke Application.
Instructions from Tachyonic Quasi-Crystals vs. Unobtainium?
The resources to facilitate the creation of bespoke applications for Windows which can interface with either Arduino or Propeller via serial, USB, Bluetooth, or TCP/IP are provided in the GitHub repositories. Thus the "propeller debug terminal...

Instructions
Instructions from Budget DIY ESP32 GPS Base Station and Receiver
Best Budget DIY GPS/GNSS Base Station using the UM980 and a ESP32Introduction The ESP32 is a versatile microcontroller renowned for its WiFi and Bluetooth capabilities. In this guide, we’ll walk you through setting up the your ESP32 development board...

Instructions
Instructions from DIY Ntrip Server and Reference Station Setup
DIY Onocoy Reference Station Setup GuideIn this guide, we’ll walk you through the process of setting up your own GPS Onocoy server using cost-effective hardware options and reliable GPS receivers. Whether you’re interested in enhancing the accuracy of...

▇▇▇▇ Counting and Dividing ▇▇▇▇
Instructions from FPGA Bootcamp #2
The remainder of the Verilog takes the 12MHz clock and uses it to drive a 16 bit counter. When the counter overflows, another counter increases. When that counter reaches 91, the secondary counter goes to zero. This takes roughly 1/2 second at 12MHz....

Cheap-dirty-perfect V-Groove Foam Cutter / Bender
Instructions from Cheap-dirty-perfect V-Groove Foam Cutter / Bender
To bend the foam...Add some adhesive tape on the backside of the foam and you can safely bend it.I learnt this trick from Ed at Experimental Airlines and used the tool to build his Photon glider.

Decoding Eddystone UID
Instructions from Bluetooth Beacon proximity gateway
Beforedecoding the advertisement data, we need to understand what isEddystone. Eddystone was created by Google as a open format to be used on Android and iPhone devices. On the format specification, 4 different format are described. Eddystone-UID – Used...

▇▇▇▇ Create a Testbench ▇▇▇▇
Instructions from FPGA Bootcamp #1
Before you commit your design to an FPGA, you’ll probably want to simulate it. Debugging is much easier during simulation because you can examine everything. When the Verilog simulator runs, it follows rules about timing that take into account how everything...

▇▇▇▇ Key Point #1: Does Verilog Execute Like Software? ▇▇▇▇
Instructions from FPGA Bootcamp #1
(Note: now we are going to start working on the Adder. You can download the source from the file section or follow along in the online simulator). Verilog isn't executable in the same way that C or Python code is (except when it is). That’s...

▇▇▇▇ Understanding Clock Division ▇▇▇▇
Instructions from FPGA Bootcamp #2
At these clock frequencies, this technique of dividing down the clock is OK, but usually you'd rather use the FPGA's clock circuitry like a PLL or DLL to generate different timings, if possible. How you do this will depend on your FPGA and won't work...

Wine not shed some light?
Instructions from Wine not shed some light?
6. ASSEMBLE LAMP HOLDERAssemble the Lamp holder assembly using:1x Female reducer1x 15mm Straight NippleThe lamp holder fitted amazingly into the end of the nipple. The insides of the nipples were dremel'ed out so the edges would not cut the wires.Space...

Aeroponic All-year Greenhouse on a Budged
Instructions from Aeroponic All-year Greenhouse on a Budged
Next we will prepare the water flow. I decided to use this combination of pump and tubing, because they fit without an adapter. Other combinations work also. Clear tubbing isnt the best solution, because algae will grow inside the tubes. you can prevent...

MINI-Zee: a $100 DIY smart drone with the Pi Zero
Instructions from MINI-Zee: a $100 DIY smart drone with the Pi Zero
Bill of Material (US$ - Transport & taxes excl.):Raspberry Pi Zero 5.MPU 9205 (SPI 9 dof IMU) 8.MS 5611 (SPI Baro) 9.PCA 9685 (16 channel PWM Servo Driver) 5. 3.3 v. regulator 1.BEC 3 amps 3.Breadboard, Resistors, Connectors, Misc. 7. AutoPilot: 38.HobbyKing...

1
2
3
4
5
>
>|