Close

181 Results for "%E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%86%978489%E2%86%978306%E3%80%8B%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%E2%94%A6%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80world%EC%84%A0%EB%A6%89%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EC%82%AC%EC%9D%B4%EC%A6%88%EC%B2%AD%EB%8B%B4%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80promotion%20%EC%84%A0%EB%A6%89%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%E2%94%AB%20%E2%88%AB%EC%84%A0%EB%A6%89%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80decided"

  • Cree Dimming Level

  • Flash the Arduino with the following sketch. This is also included as a file attached to the project. int last_level = 0; bool last_state = false; bool stable = false; int count = 0; const int cutoffs[198] = {/* 1*/ 833, 831, /* 2*/ 825, 823, /* 3*/...
  • The Electronic Components

  • For this project we’re going to need nine different types of components, along with a heat sink of some sort. Three different types of resistors are needed. I went with 1W ratings for each resistor. One 2512 130Ω surface mount resistor, one 2512...
  • Address Bus

  • This last step is going to get REALLY tedious because the Address Bus has so many lines. But this is the last step and you should be done, so keep it up just a little longer. A0: 6502 Pin 9 to FLiP pin 13 A1: 6502 Pin 10 to FLiP pin 14 A2: 6502...
  • Bill of Materials (Sans Lens)

  • LCD: $17.56Round Heat Sink: $3.63LED: $0.34130Ω Resistor: $0.362.2kΩ Resistor: $0.41BD 139-16 Transistor: $0.40BC 547 Transistor: $0.20Slide Switches: $0.76200Ω Resistor: $0.76LCD Port: $1.01PCB: Varies wildly, PCB Way is a good one,...
  • Voices of the past, speak up!

  • You will need the text to speech board from Mikroelektronika: https://www.mikroe.com/text-to-speech-click Don’t forget to jumper it for 5 V! By default it is set of 3.3 V! You can solder it in directly, but make sure you have enough clearance for the...
  • Cabling the MPE device's hardware-components

  • Power supply: Ground - GND from Teensy (power-rail as described in the PDF attached) +3.3V - 3.3V from Teensy (power-rail as described in the PDF attached) Joystick 1: VRx - Pin 23/A9 (horizontal control) VRy - Pin 22/A8 (vertical control) SW - Pin 01...
  • rDUINOScope Boiana

  • TEP 3 AssembleFor more detailed instructions, please visit the Project Website : http://rduinoscope.co.nf/rDUINO_step3.htmlNow is the time to create the Shield board. A Shield board is a board with pinouts which you stack on top of the ArduinoDUE board.Some...
  • Pedal Wiring

  • Pedalino is designed to work with the majority of expression pedals on the market, but there are a few popular pedal types which are incompatible and need to use adapters in order to work with Pedalino. There is no recognized standard for footswitch...