Results for Q%20%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%20CDDC7_C%D0%9EM%20%E2%97%86%EB%B3%B4%EB%84%88%EC%8A%A4%EB%B2%88%ED%98%B8%20B77%E2%97%86%EC%88%98%EC%9B%90%EC%9E%A5%EC%95%88%20%ED%94%84%EB%A1%9C%ED%86%A0%20%EA%B5%AC%EB%A7%A4%E0%B9%8F%ED%86%A0%ED%86%A0%ED%95%AB%ED%94%BD%E2%8F%AC%EC%98%A8%EB%9D%BC%EC%9D%B8%ED%99%A9%EA%B8%88%EC%84%B1%E0%BC%88FX%EB%A7%A4%EB%A7%A4%E2%8B%8D%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%EC%95%A0%EC%9A%A9%20thorough/

Arduino or Wemos Code
Instructions from WiFi Signal Strength Scanner Monitor or Checker
In the arduino code set your WiFi credentials char wifissid[] = "ENTER YOUR WiFi SSID HERE"; char wifipass[] = "ENTER YOUR WiFi PASSWORD HERE"; Normally, the signal strength is displayed in dBm. But for a non techie person, the signal strength in terms...

Cree Dimming Level
Instructions from Cree Dimming Level
Flash the Arduino with the following sketch. This is also included as a file attached to the project. int last_level = 0; bool last_state = false; bool stable = false; int count = 0; const int cutoffs[198] = {/* 1*/ 833, 831, /* 2*/ 825, 823, /* 3*/...

(Optionally) Add a grounded AC socket and replace the existing input plug with a grounded plug.
Instructions from Deluxe A.C. Light Bulb Current Limiter
I bought a cheap 8-foot 16/3 (16 guage grounded) extension cord from the Big Box Store and cut it, leaving 6 feet for the plug-end and 2 feet for the socket-end. De-solder the input wires to the DPDT switch and replace & re-solder with the 6 foot...

Address Bus
Instructions from L-Star: Software-Defined 6502 Computer
This last step is going to get REALLY tedious because the Address Bus has so many lines. But this is the last step and you should be done, so keep it up just a little longer. A0: 6502 Pin 9 to FLiP pin 13 A1: 6502 Pin 10 to FLiP pin 14 A2: 6502...

Redtree Hydra: A modular platform for robotics
Instructions from Redtree Hydra: A modular platform for robotics
Attaching a SensorIn order to attach a sensor, motor, camera or other component to the Redtree Hydra, the FPGA inside must be programmed. We know that this is normally a tricky task, so we created a tool to simplify it. The Redtree Hydra has four I/O...

Pedal Wiring
Instructions from Pedalino™
Pedalino is designed to work with the majority of expression pedals on the market, but there are a few popular pedal types which are incompatible and need to use adapters in order to work with Pedalino. There is no recognized standard for footswitch...

Cabling the MPE device's hardware-components
Instructions from MPE-DIY-Device
Power supply: Ground - GND from Teensy (power-rail as described in the PDF attached) +3.3V - 3.3V from Teensy (power-rail as described in the PDF attached) Joystick 1: VRx - Pin 23/A9 (horizontal control) VRy - Pin 22/A8 (vertical control) SW - Pin 01...

Decoding Eddystone UID
Instructions from Bluetooth Beacon proximity gateway
Beforedecoding the advertisement data, we need to understand what isEddystone. Eddystone was created by Google as a open format to be used on Android and iPhone devices. On the format specification, 4 different format are described. Eddystone-UID – Used...

NODE-RED CONNECTIONS!
Instructions from OBS_IRL_STREAM_DECK
The first thing we need is a basic flow to separate button presses into different outputs. [{"id":"50b49ab2.1e6f64","type":"mqtt in","z":"7805686.aa4fd98","name":"","topic":"button_glove","qos":"0","datatype":"auto","broker":"","x":310,"y":2180,"wires":[["ea9f502f.2dd17"]]},{"id":"ea9f502f.2dd17","type":"json","z":"7805686.aa4fd98","name":"","property":"payload","action":"obj","pretty":false,"x":490,"y":2180,"wires":[["425aef92.aa3da8"]]},{"id":"425aef92.aa3da8","type":"function","z":"7805686.aa4fd98","name":"ButtonSeperator","func":"var...

Sigma Derby Clone
Instructions from Sigma Derby Clone
Programming the finish switch Mega board)The finish switch Mega board will be the brains of the operation. It will come up with a 5 digit number to Serial communicate to the other boards. The 5 digit number will contain 3 pieces of information. The first...

MINI-Zee: a $100 DIY smart drone with the Pi Zero
Instructions from MINI-Zee: a $100 DIY smart drone with the Pi Zero
Bill of Material (US$ - Transport & taxes excl.):Raspberry Pi Zero 5.MPU 9205 (SPI 9 dof IMU) 8.MS 5611 (SPI Baro) 9.PCA 9685 (16 channel PWM Servo Driver) 5. 3.3 v. regulator 1.BEC 3 amps 3.Breadboard, Resistors, Connectors, Misc. 7. AutoPilot: 38.HobbyKing...

The NanoStillery™ - Whiskey Distillery
Instructions from The NanoStillery™ - Whiskey Distillery
Arduino Mega Code The code in the main control panel is fairly standard except for the part which sends data down the I2C bus to the Adafruit Feather slave. This code can be found in 'void sendData()' below and involves disassembling complex float numbers...

Sigma Derby Clone
Instructions from Sigma Derby Clone
Program the betting station)The betting station needs to know the odds of the current race to know what to pay out if you win. It also needs to know the race winner.Once again this is the fun version, so there is no code here for coin in, or cash out.#include...

Adding video and sound cards to RC2014 aka RC2014+TMS+AY
Instructions from MSX on RC2014
In this step we will add the video module and optionally the sound module at that point you'll be able to run demos and games written specifically for this setup. Unless you want to run MSX BASIC or MSX games then you may want to stop there. RC2014 +...