Close

5533 Results for "∇ 최저가 Ò1Ò《⑤⑦93》74⑸⑻ ∇런닝래빗가격β런닝래빗주대result런닝레빗가라오케주대런닝래빗주대런닝레빗가라오케주대voyage 런닝래빗가라오케ㅅＧ런닝레빗가라오케주대indies"

  • Ultra Simple 2x4 Server Rack
  • Instructions     from Ultra Simple 2x4 Server Rack
  • Have them cut the boards for you to these specs:Board #1 and 2: 20.75", then 20.75", then the remainder should be cut in half (will be 27.25" each, minus whatever is converted to sawdust)Board #3 and 4: Just saw these in half: 48" long.This will give...

  • EFFECTIVE STUN GUN

  • Instructions     from EFFECTIVE STUN GUN
  • CLEAN UP YOUR WORKSPACEGather your componentsWe will start with the "multivibrator" or "Oscillator" circuit. It supplies an A.C. Waveform to the "T1" transformer. you can make a PCB or just solder the legs togetherIt's not a very complex circuit.First...

  • The weight
  • Instructions     from Projector Screen
  • Keeping the screen tensioned is what keeps it flat. I provided the needed tension almost all in the vertical axis with weight. Take a scrap of your screen fabric, and test how hot you can get an iron on it, before it melts. Three layers, and two are...

  • The roller
  • Instructions     from Projector Screen
  • Cut your fence post a few inches longer than your screen width. Deburr the edges, inside being just as important. Make 2 hardwood, Lexan, or acrylic blocks to plug the ends and accept your threaded rod. Being centered and true is important, or your whole...

  • Joining the two
  • Instructions     from Projector Screen
  • Get help. Clean yourself. Clean the floor. Wash your hands often. Look for the weld line on the post, or otherwise establish a line along it's length. Line up your fabric with this line, and tape across the joint, applying slight tension the the fabric....

  • Smile Station
  • Instructions     from Smile Station
  • Well in this step I will focus on the code and getting it to work with Facebook and Flickr ....---------------------------------------------------------------------------------------------------------#!/usr/bin/env python# this file is run using this...

  • Sci-fi grade Home Automation
  • Instructions     from Sci-fi grade Home Automation
  • Build the base station using the following simple steps:Disassemble the outlet controller remote and throw away the plastic casingSolder wires between the +5v line on the Arduino and the positive battery terminal on the remote.Do the same with the ground...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday