Close

4954 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ 《〈 문의 OIO↗5793↗7458 》〉 ㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

  • CIRCUIT
  • Instructions     from Over Engineered XBOX Controller Stand
  • The circuit that followed was made up primarily of 15 WS2812 RGB LEDs linked to an XIAO microcontroller. We have integrated the IP5306 IC Setup, a power management integrated circuit that is frequently used in power bank applications. In these applications,...

  • PuriBottle
  • Instructions     from PuriBottle
  • To make the ultrasonic sensor work, you have to read this program and create the circuit that matches with it!Here is the program:/* * created by Rui Santos, http://randomnerdtutorials.com * * Complete Guide for Ultrasonic Sensor HC-SR04 * Ultrasonic...

  • Testing With Out Pen Up Down
  • Instructions     from Cute Drawing Robot - Servo and Android
  • 1) Now the 2 servos are fitted to the aluminium frame slot and stick with hot glue gun. 2) Join the arms with screws and before fitted fully, want to check and tune the software. 3) So paste the frame to a flat surface facing each other correctly center....

  • Checking All
  • Instructions     from Cute Drawing Robot - Servo and Android
  • 1) Its time to check. 2) Connect the connectors and power supplies. 3) Draw lines in the application and click open port and then click draw buddy. 4) Buddy draw it as like the picture . Problems Faced at first 1) Drawing is drawn in mirror format. 2)...

  • Upload firmware to Arduino
  • Instructions     from Mug-O-Matic: A Modular Tiny CNC
  • Copy the relevant arduino code from the github. https://github.com/mechengineermike/Mug-O-Matic Download the latest Arduino IDE https://www.arduino.cc/en/Main/Software and paste the code from the TinyCNC Github in there.  Connect the usb...

  • Setup
  • Instructions     from BLE HID Mouse
  • Upload the code and press the reset button once the upload is finished.Immediately after reset, the board will begin BLE advertising as “AMEBA_BLE_HID”. On your host device, go to the Bluetooth settings menu, scan, and connect to the board.You...

  • 3. Buying and cutting
  • Instructions     from Saw game
  • The next step is buying whatever material you need based on the previous steps. You'll also need a bunch of screws, dowellings, a saw, a metal rod with 5-10mm diameter based on the dimensions you chose, a wooden rod long enough to be cut in half and...

  • Building the shutter button
  • Instructions     from Blockchain Camera
  • TOOLS PCB Board CutterNipperTweezersSoldering StationSolderBlack Fineliner Pen 0.5mmPrecision Files COMPONENTS Universal Prototype Board 95x72mm 1.6mm thickAdafruit Soft Tactile Button x20.3mm Polyurethane Copper Wire 100mm Cut an universal prototype...

  • The Prints:
  • Instructions     from Make Wall Art with an iDraw A3 Pen Plotter
  • Print #1 (Floral Line Art) So now the question is, what to print first? I went to my favorite resource for graphics and downloaded a floral single-line SVG. The plotter printed it like a champ. Clean crisp lines on just some plain colored copy paper....

  • PCB DESIGN
  • Instructions     from Live TEMP Meter with XIAO and AHT10
  • The next step of this project was to put everything together to create a basic PCB that would contain all of the components we used to create the breadboard version, in addition to a lithium cell with a charge discharge circuit to power the XIAO module,...

  • Lasercut train points switch box
  • Instructions     from Lasercut train points switch box
  • STEP 5 – MAKE DESIGNNow you’ve got the overall dimensions you can produce your mimic. This can be done either by:Laser-cuting using a CAD file – this can be done on plywood or acrylic, the above design is translated to a package such as inkscape and...

  • Bare board assembly (for RPi placement skip to step 2)
  • Instructions     from PiPod
  • Recommended tools and supplies Hot air reflow stationSoldering ironSolder pasteFlux penTweezers Component placement Start by soldering the SMD components to the board using a hot air reflow station. The names on the silkscreen (images bellow) can be...

  • Optional: Power Switch
  • Instructions     from Reimagining Duo Pop
  • If you are planning on using the AAA battery container then you will want to modify the case to fit your switch. NOTE: This is just one way of adding a switch. Please modify as needed. 1. I used a Single Pole Double Throw (SPDT) switch that I pulled...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday