The Dragino IoT Kit is a well-designed kit to facilitate beginners and developers to quickly learn LoRa and IoT Technology. With the help of this kit, you can make a lot of LoRa based project and also learn about the IoT applications of LoRa. This kit...
Each kit comes with the following items included: 1 - Stuffed plushie 1 - 3mm red LED 1 - 3mm green LED 1 - 3mm blue LED 3 - Red wires 3 - Blue wires 2 - 499ohm resistors 1 - Battery holder 2 - CR2032 batteries
You can get ESPboy Kit with partially preassembled PCB where is soldered most of small components. Only 3 modules and speaker should be soldered in following order: 1. speaker (as you can see on black PCB pictures, not buzzer, as at red PCB pictures)...
First, install all of the through-hole components: The 4 position DIP switch. Install the “on” side towards the top.The pilot screw terminal. Insure the wire openings face out over the edge of the board. The switch 2 pin header.The...
*Note: If you chose the unstripped wire option, strip approx. 1" off the ends of each wire using 30AWG wire strippers. Strip approx. 1" off the ends of the battery holder using 24AWG wire strippers.Helpful Tips for stripping wire: To...
*Note: If you chose the unstripped wire option, strip approx. 1" off the ends of each wire using 30AWG wire strippers. Strip approx. 1" off the ends of the battery holder using 24AWG wire strippers.Helpful Tips for stripping wire: To...
Firstly you will need to get the £10 car reversing kit off ebay. The type you want has 4 ultrasound transducers. You don't need the ones with video cameras etc. Beware that the control circuit will need some modifications which will stop it working...
Step 1: Download the README file and LicenseStep 2: read the README file (and license :))Step 3: Download the Biosphere Solar -DEV KIT- How To Step 4: Follow the steps!Step 5: Use your creationStep 6: Share your experience