1038 Results for "3D%20printing"

3D Model
Instructions from DSKY
Print the rest of the 3D parts. Install inserts. This was fairly straight forward. Verify fit as you print each part.

3D Printing
Instructions from Teletouch
First of all we should print all of the parts from 3D printer. In first try we used model from bq3D.

3D Printing
Instructions from BEST DURABLE 3D PRINTED LENS CAPS
For 3D printing you will need to set layer height a 0.2mm maximum to get a good resolution on the thread part of the cap.

3d printing
Instructions from Battle boat Game
Start to print the main part of the project like the boat and the turret.

3D PCB
Instructions from 100% reusable electronics
Now comes the fun parts creating a 3D PCB. With Fusion 360 integration with EAGLE that’s a matter of a few clicks. This is not a 2D PCB to 3D tutorial refer to the many tutorials and videos for that on your own.

3D printing
Instructions from E-TKT: anachronic label maker
16 parts in total, using approximately 220g of filament (I’ve used PETG). Click above to see an interactive 3D model. 📐 All the .stl provided are in the correct orientation for optimal printing: A_bottom *B_wall *C_wall_track *D_pillarE_pillarF_pillarG_pillarH_nema_cover...

3D printing
Instructions from Minimalist Rover/ Satellite
When we had finished the satellite, we decided it would be nice to place it in its natural environment. That's why we decided to 3D print a model of the moon's surface.

3D Modeling
Instructions from DIY Smart Scale With Alarm Clock
In this project I used the same 3D printed parts designed for my DIY Wi-Fi Smart Scale project. The smart scale was desgined using Fusion 360 CAD software. The model is composed of three different 3D printed parts: cover, case and foot. A 3D printed...

3D Printing
Instructions from Reflow Oven
I printed 2 parts: A mount for the display to be glued (not optimised for the curvature of the oven) A mount for the rotary encoder

3D Modelling.
Instructions from IVY
We used Fusion360 to model the shell of our project taking care of the space needed inside, and the components. Also we started talking about materials we could use, light colors, etc.

3D Printing
Instructions from 3D Printed Audio Exciter
3D Print each of the components in the .zip file. These include the coil bobbin (top and bottom), Speaker "cone", and speaker "back". Be particularly careful when you pull the speaker cone off the bed! I found that pulling the glass...

3D Printing
Instructions from Binary Wrist Watch
Because this was something I wanted to use on a regular basis, the watch needed to look polished and not super DIY. That's why I had the watch body profesionally 3D printed. If you have access to a 3D printer with great resolution and strong materials...

3D Printing
Instructions from Pixo | Dazzling Desk Display
Now, I've got the Pixo enclosure and back cover 3D-printed, both of which I designed. I utilized the Anycubic Neo 3D printer with a 2mm layer height. Take note: in my design, the enclosure and diffuser are part of the same body, allowing for a seamless...

3D Model
Instructions from Fl'Air
Detailed 3D models were prepared using Autodesk Fusion 360, mentioning details about the chassis design, hubs, wheels, suspension, various joints and bends. For the 3D model we used the dimensions of the wheels [rear and front] and suspension [shock...

3D Modeling
Instructions from DIY Wi-Fi Smart Scale (with ESP8266)
The smart scale was desgined using Fusion 360 CAD software. The model is composed of three different 3D printed parts: cover, case and foot. The case provides an enclosure for the electronics, protecting them from physical contact. Electronics are attached...

1
2
3
4
5
>
>|