470 Results for "3D printing"

3D Printing
Instructions from Sci-Fi 3D Printed Mask With Transparent Display
Download the Winter Soldier Mask stl Files.Open the files in slicing software.I have printed the objects with 0.2mm layer height, 20% infill and with tree support enabled.After slicing 3D print the objects.Remove the support material once...

Step 2 – Open the stl file in your 3D slicer tool
Instructions from 3D Printed Ergonomic & Friendly Asthma Inhaler
Open the downloaded .stl model file with your favourite slicer tool (i.e. Cura, KISSlicer, Repetier, Slic3r, etc.).The 3D printing slicer prepares the selected model for your 3D printer, generating g-code, which is a widely used numerical control programming...

3D printing
Instructions from Keymu - open source keychain-sized gaming console
The STL files are available on Thingiverse or directly from the project files. These STL files are for 3D printing or visualization, if you feel like modifying the 3D design and missed Log#4, don't worry: all the Solidworks source...

3D Printing
Instructions from Fear the Scary Cat!
I have included the STL files that I used to 3D print the cat's head, body (with labeled base plate), and the base housing for the electronics. The cat's body took a long time to print...around 18-24 hours at the layer height and speed that I selected....

3D Print the Blind Repair Clip
Instructions from 3D-Printable Patio Blind Repair
Once modeling is complete (or if you decide to just print my provided STL file), export the STL file to your desktop. Select your preferred 3D print slicing program in order to prep the file for printing. I personally use Simplify3D. There are free options...

House 3D Model and Pinting
Instructions from Solar Weather Station With ESP32, SIM800L, ESP8266
For the end, let's make nice weather station case and print it. I've found one 3D model in Thingiverse and modified it. I'll add it's link below. Also I'll add my version of model if you are planning to follow with the same components. I've edited 3D...

Step 3 - Set the 3D printer parameters and generate the g-code
Instructions from 3D Printed Ergonomic & Friendly Asthma Inhaler
Once you have opened the .stl model file with your slicer tool, set the 3D printer parameters as following: Perimeters = 2Solid top & bottom layers = 3Layer Resolution = 0.25 mmLayer Infill = 25 - 30% There are basically 2 ways to orientate the object...

3D printing the enclosure
Instructions from OpenRPNCalc
Here are a few more-or-less random notes about 3D printing the calculator enclosure. I've printed it with the Creality Ender 3 V2 printer using PETG plastic, and the case went really well I think. Contrary to what's written in many websites,...

3D Modeling
Instructions from Positivitypunk Backpack
My build started in Fusion 360. First modeling everything that needed to fit within the back and arranged them somewhat to fit tightly. I left room for a raspberry pi, which I did not model because I measured the space between the components and found...

Printing
Instructions from Repairing a tool wall organiser
Print 2 halves of the same model at a 3D printer with ABS filament. High infill recommended (over 50%)

STEP 2: SMOOTH OUT SOME IMPERFECTIONS THAT RESULTED FROM THE 3D PRINTING PROCESS
Instructions from 3D PRINTED PORTABLE WIND TURBINE
It is recommended to sand the pieces in the places where the supports were created. Also to smooth out any bumps that could affect performance or cause damage to hands when handling. Be careful with the sharp edges of the plastic, they can cut your skin....

3D Printer modification
Instructions from Pimp my 3D Printer
Since all 3D printers are different, we will show an overview of each step rather than provide detailed documentation. It basically involves removing two parts from the 3D printer: the extruder and the hot end. Step 1: Remove the 3D printer parts We...

The top 3D-printed Raspberry Pi cases
Instructions from The top 3D Printed Raspberry Pi cases
If you are looking for the best 3D-printed Raspberry Pi cases, then you have come to the right place. In this article, we will be discussing the top 10 3D-printed Raspberry Pi cases that are available in the market. We all know that the Raspberry...

Step 2: Printing the Parts
Instructions from OpenBraille Steam
All the parts can be 3D printed. Follow the link and get the files: https://www.thingiverse.com/thing:258673

Easy Build my own useful Robot For Less Than $100
Instructions from Easy Build my own useful Robot For Less Than $100
3.2. MoldUse 3D printer to print mold.3.2.1. Download SelfieBot mold STL files at: https://pinshape.com/items/22311-3d-printed-selfi... or https://pinshape.com/items/22311-3d-printed-selfi...3.2.2. Use Cura (download Cura) to convert SelfieBot mold STL...

|<
<
1
2
3
4
5
>
>|