470 Results for "3D printing"

My first copter build with RPi2 and Emlid Navio2
Instructions from My first copter build with RPi2 and Emlid Navio2
3d printing of the case and anti-vibration mount. I should say that Emlid has an anti-vibration mount model only for 450mm frame. In my case I had to redesign it for 250mm. 3d model for case I've taken from here. Within the project I've attached files...

3D Printable Micro Peristaltic Pump
Instructions from 3D Printable Micro Peristaltic Pump
Step 2 - Break in the GearingInitially due to the nature of 3D printing the design will be locked tightly together, insert a 7.75mm hex bit into a power drill and run it for several minutes to wear in the gearing.

Building the Crop Water Stress Sensor
Instructions from Crop Water Stress Sensor
Like for most builds, these instructions start with the suggestion to fire up your 3D-printer and to start printing the 3D objects. I can recommend to use material that will last long outdoors and doesn't degrade with the weather conditions such as PETG...

Otto DIY
Instructions from Otto DIY
Step 2: 3D print settings Otto is very well designed for 3D printing, the files that you had downloaded are property oriented and centered, so wont give you trouble if you follow this common parameters: Recommended to use a FDM 3D printer with PLA material.No...

About the Project
Instructions from DIY Inkjet Printer
In the following steps I will tell you how to build my DIY Inkjet Printer, but first I want to tell you a bit about this project. Back in 2019 after reading through the build logs of the Oasis 3DP I was searching on the internet if someone has ever tried...

How to make it
Instructions from The Omnitrix
1. Design: Design the 3D model of your Ben 10 watch using 3D modeling software such as Blender, TinkerCAD, or Fusion 360. Be sure to include spaces for electronic components, watch movement and 3D printing mechanisms. 2. 3D printing of components: Divide...

Platform for Raman Probe Assembly V 01.0b
Instructions from 3D Printable Raman Probe
This is the draft drawing for the V 01.0b Platform with M4 setscrew which secures the Raman probe to the base of the platform. The holes on the platform are there on purpose for 2 reasons, 1 for cost savings on material when 3d printing and 2 they are...

WeatherPi - Solar Powered Raspberry Pi Station
Instructions from WeatherPi - Solar Powered Raspberry Pi Station
3D Printing and the WeatherPiIn building the WeatherPi Solar Powered Weather Station, we saw a couple of parts that we decided it would be good to 3D Print. In the 6 months since we bought our SwitchDoc Labs MakerBot Replicator, we have totally changed...

Hardware Assembly
Instructions from Network Detached Storage Device
Parts: Raspberry PiHDD/SSD + cablePower BankPrinted Parts (available at https://github.com/sdfgeoff/network_detached_storage/tree/master/generated/stl ):2x Suspension Plate2x Lid1x HandleTooled1x HandleWithHandle1x HandleWithHandleHandle1x Shell1x...

  General printing instructions and guidelines
Instructions from FULL RC Hawker Hurricane
These are some guidelines derived from my printing experience and they could require readjusting according to your machine type and 3D printing techniques you use. I know people started experimenting with tilted prints to increase the strength and surface...

Assemble the grip
Instructions from Enchanted Thor Hammer
Start by inserting the 1/2" PVC conduit into the top portion of the grip, through the handle and in to the bottom portion of the hammer head. There are 2 distinct benefits of using a PVC pipe. It adds a lot of strength on the slender portion of the assembly...

Different Steps of the Project : Space Invaders
Instructions from Space Invader's
Different Steps of the Project : Space Invaders Step 1: Project Planning and Team Coordination 1.1 Define Project Scope and Objectives: Clearly outline the goals of the Space Invaders Physical Controller project. Identify key functionalities, features,...

STEP 7: SCREW-DOWN THE NP-F BATTERY MOUNTING PLATE
Instructions from 3D PRINTED PORTABLE WIND TURBINE
You are probably wondering what is the reason for this Mounting Plate to be a separate piece from the central body. I decided to do it this way for 2 main reasons. The first is that it makes the 3D printing of the central body less complex by requiring...

Designing the button cap
Instructions from Quiz-o-matic wireless buzzers
An important part of the quiz experience is smashing the buzzer button when you figure out the answer. Typical 10mm diameter buttons weren't going to cut it because they're too small for the satisfaction. Sizeable arcade buttons weren't available cheap...

Flypi - cheap microscope/experimental setup
Instructions from Flypi - cheap microscope/experimental setup
Printing the necessary parts from the scad fileNecessary parts:OpenScad (free open source software, can be downloaded here).The scad file containing the Flypi's 3D model, can be found on the project page, in files.Steps (images below):Use OpenScad and...

|<
<
1
2
3
4
5
>
>|