Close

6542 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

  • Bench power supply
  • Instructions     from Bench power supply
  • 1) Come up with a simple good idea.2) Add good ideas to it.3) Try to implement it.4) When it fails, start to strip down the design to try to get it to work.5) Strip it down more6) More...7) Rejoyce when something simple works8) Add a few simple things...

  • Ultra Simple 2x4 Server Rack
  • Instructions     from Ultra Simple 2x4 Server Rack
  • Have them cut the boards for you to these specs:Board #1 and 2: 20.75", then 20.75", then the remainder should be cut in half (will be 27.25" each, minus whatever is converted to sawdust)Board #3 and 4: Just saw these in half: 48" long.This will give...

  • EFFECTIVE STUN GUN

  • Instructions     from EFFECTIVE STUN GUN
  • CLEAN UP YOUR WORKSPACEGather your componentsWe will start with the "multivibrator" or "Oscillator" circuit. It supplies an A.C. Waveform to the "T1" transformer. you can make a PCB or just solder the legs togetherIt's not a very complex circuit.First...

  • The weight
  • Instructions     from Projector Screen
  • Keeping the screen tensioned is what keeps it flat. I provided the needed tension almost all in the vertical axis with weight. Take a scrap of your screen fabric, and test how hot you can get an iron on it, before it melts. Three layers, and two are...

  • The roller
  • Instructions     from Projector Screen
  • Cut your fence post a few inches longer than your screen width. Deburr the edges, inside being just as important. Make 2 hardwood, Lexan, or acrylic blocks to plug the ends and accept your threaded rod. Being centered and true is important, or your whole...

  • Joining the two
  • Instructions     from Projector Screen
  • Get help. Clean yourself. Clean the floor. Wash your hands often. Look for the weld line on the post, or otherwise establish a line along it's length. Line up your fabric with this line, and tape across the joint, applying slight tension the the fabric....

  • The supports/bearings
  • Instructions     from Projector Screen
  • Drill two holes, almost all the way through, two blocks of something the same size as the outer diameter of your roller blade bearings. It's a common size like 3/4 or 7/8in. Make them identical. For the hole you are after, you need a nut on the threaded...

  • Smile Station
  • Instructions     from Smile Station
  • On this next link is where I got the info for sending the photos taken with its own email account .http://mitchtech.net/connect-raspberry-pi-to-gmail...I tested it by copying the script to send attachments in to the python editor on the rpi by first...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday