Close

10946 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

  • Ultra Simple 2x4 Server Rack
  • Instructions     from Ultra Simple 2x4 Server Rack
  • Screw them together.  See the Sketchup plan (attached).  The 48" boards are obviously the "rails" and support posts.  20.75" boards should link the rails together to form front and back panels.  Squaring things up may be a challenge,...

  • Ultra Simple 2x4 Server Rack
  • Instructions     from Ultra Simple 2x4 Server Rack
  • Add your gear.  Use more wood screws to secure faceplates to the wooden posts.  For small items like cable modems and wireless thingamajigs, you can put wood screws into the side and hang them (most of these have special slots, as if they were......

  • EFFECTIVE STUN GUN

  • Instructions     from EFFECTIVE STUN GUN
  • CLEAN UP YOUR WORKSPACEGather your componentsWe will start with the "multivibrator" or "Oscillator" circuit. It supplies an A.C. Waveform to the "T1" transformer. you can make a PCB or just solder the legs togetherIt's not a very complex circuit.First...

  • Getting started
  • Instructions     from Projector Screen
  • Get and keep everything clean, including the back of your fabric. When you roll up the screen, the back touches the front, and any dirt will transfer right into the middle of your new screen. Take the actuator arm off the wiper motor. See what the threads...

  • The weight
  • Instructions     from Projector Screen
  • Keeping the screen tensioned is what keeps it flat. I provided the needed tension almost all in the vertical axis with weight. Take a scrap of your screen fabric, and test how hot you can get an iron on it, before it melts. Three layers, and two are...

  • Painting the fabric
  • Instructions     from Projector Screen
  • The light block fabric is actually three layers. White on both sides, with black plastic in between, but you are still painting fabric so you may have to experiment to get it right. Lay your light block fabric out on some hard clean surface. Don't step...

  • The roller
  • Instructions     from Projector Screen
  • Cut your fence post a few inches longer than your screen width. Deburr the edges, inside being just as important. Make 2 hardwood, Lexan, or acrylic blocks to plug the ends and accept your threaded rod. Being centered and true is important, or your whole...

  • Joining the two
  • Instructions     from Projector Screen
  • Get help. Clean yourself. Clean the floor. Wash your hands often. Look for the weld line on the post, or otherwise establish a line along it's length. Line up your fabric with this line, and tape across the joint, applying slight tension the the fabric....
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday