Close

469 Results for "%E3%80%8A%20%EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98%20OIO%E2%89%A1%E2%91%A7%E2%91%A389%E2%89%A183O%E2%91%A5%E3%80%8B%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%EA%B2%AC%EC%A0%81%E3%82%88%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8ago%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EA%B0%95%EB%82%A8%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8eighty%20%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%CE%BA%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%E2%92%B2%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%83%A1%EF%BD%83%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8literary"

  • Construction of Probe
  • Instructions     from ArduAOA
  • Cut 2.0 x 1.5 breadboard lengthwise such that one piece had the center screw holes intact.   P1 is pressure side of pressure sensors.  P1 is port closest to Pin 4.  Pin 1 is the notched pin.  Solder pressure sensors to breadboard...

  • Lighting Design
  • Instructions     from Long Range RFID Controlled Dry Cleaner
  • We had to do lots of experimenting with different types of glow powders and different types of lighting.LightsFor the best "pop" highlighting the fine details of your leaves, you want a really low wavelength (below 400nm, like 390nm). This reduces the...

  • Nano Bike Alarm
  • Instructions     from Nano Bike Alarm
  • Hardware[Update: 2015/07/01 - Added additional info for those connecting the Nano Alarm to higher voltage (24, 36, 48 VDC eBike) batteries. ] NOTE- Before you start soldering, it's a good idea to plug your Arduino into your PC via the FTDI adapter and...

  • Instructions
  • Instructions     from Budget DIY ESP32 GPS Base Station and Receiver
  • Best Budget DIY GPS/GNSS Base Station using the UM980 and a ESP32Introduction The ESP32 is a versatile microcontroller renowned for its WiFi and Bluetooth capabilities. In this guide, we’ll walk you through setting up the your ESP32 development board...

  • Sigma Derby Clone
  • Instructions     from Sigma Derby Clone
  • Programming the finish switch Mega board)The finish switch Mega board will be the brains of the operation. It will come up with a 5 digit number to Serial communicate to the other boards. The 5 digit number will contain 3 pieces of information. The first...

  • Arduino GPRS IOT Weather Station
  • Instructions     from Arduino GPRS IOT Weather Station
  • Arduino Soil Probe Using DS18B20 and DIY Moisture Hardware:As a fanatical gardener or a professional farmer, knowing the environmental conditions of our soil is invaluable. Obviously, we can't measure the number of worms or pieces of organic humus, but...

  • Mechanicals
  • Instructions     from Basic Farm Robot 2021
  • In previous projects we spent a lot of time designing and building the mechanical systems and we really wanted to short cut all the hard work by using a ready made system that could be bought reasonably cheaply 'off the shelf'. We looked at mobility...

  • USB Caliper HID
  • Instructions     from USB Caliper HID
  • //--------------------------------------------------------------------- // USB Caliper HID // // version 0.1 - incomplete, only caliper read and output to USB // structure in place. Enough to read from Caliper // and output it. //---------------------------------------------------------------------...

  • Instructions
  • Instructions     from DIY Ntrip Server and Reference Station Setup
  • DIY Onocoy Reference Station Setup GuideIn this guide, we’ll walk you through the process of setting up your own GPS Onocoy server using cost-effective hardware options and reliable GPS receivers. Whether you’re interested in enhancing the accuracy of...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday